Tor Elastaprime (RC100) is a high performance universal primer that provides excellent binding and adhesion to most substrates including plastics, wood, mineral substrates, ceramic tile, copper, zinc, brass, steel, galvanised steel, aluminium etc. Tolerant of low temperature/high humidity conditions. Used in conjunction with Tor Elastaseal, Elastadeck and...
SikaSeal Lead & Gutter
SikaSeal Lead & Gutter is a low modulus, neutral cure sealant specifically designed to give exceptional adhesion to soft metals such as lead, brass etc. The product is specially formulated as an alternative to mortaring Lead Flashing and Sheet into Brick, Stone and Concrete. Will not stain or corrode soft metals unlike most conventional sealants, low dirt pick up, excellent flexibility.
SikaSeal Lead & Gutter is a low modulus, neutral cure sealant specifically designed to give exceptional adhesion to soft metals such as lead, brass etc. The product is specially formulated as an alternative to mortaring Lead Flashing and Sheet into Brick, Stone and Concrete.
- As an alternative to mortaring in Lead flashing and sheet into brick, stone and concrete.
- Suitable as an expansion joint sealant.
- Weather sealing and joint sealing to pre-formed panels.
- Sealing soft metals such as lead, copper and zinc.
- Parapet and roof weather sealing applications.
Features & Benefits
- Excellent adhesion to metals - will not stain or corrode soft metals unlike most conventional sealants
- Low dirt pick up
- Excellent flexibility
- Excellent low and high (+150°C) temperature resistance.
- Solvent free - low shrinkage during vulcanisation.
- High resistance to plasticizer migration - may be used over water based and solvent based paints.
- Excellent external weathering properties.
- Extended shelf life - up to 24 months from date of manufacture.
- Do not use on bituminous substrates, natural rubber, EPDM rubber or on any building materials which might bleed oils, plasticizers or solvents that could attack the sealant.
- Do not use to seal joints in and around swimming pools.
- Do not use for joints under water pressure or for permanent water immersion.
- For further information please contact the Technical Department.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Developed for use with the Bullet Roof Rapid system to provide additional key and adhesion, ensuring the optimum bond to the substrate. Top Features Fast cure time Single component-No mixing Elastic when cured Multi-surface use
Eagle Wet Primer is a solvent-free resin with low viscosity, applying in a single layer to increase adherence of waterproofing systems - use with Desmopol membranes, even on concrete or mortar substrates with high residual moisture.
Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal, fibre-cement etc)...
Tor Raincoat Stabilising Sealer (RC351) is a modified acrylic resin based, low viscosity solution containing a biocidal additive and organic solvents. Tor Raincoat Stabilising Sealer is for the priming/stabilising of bare, cementitious (eg. asbestos cement, fibre cement etc) porous and friable pitched roofing substrates prior to application of Raincoat...
TorVap VCL / CM (SS6000800) is an aluminium faced, glass-fibre reinforced self-adhesive bituminous waterproofing membrane that forms a total vapour barrier and is used as both vapour control layer and carrier membrane in conjunction with Tor BUR system build.
Tor Elastaseal Z Fibretex (RC142) is a cold applied single pack, high solids, moisture activated, elastomeric urethane coating, containing inert reinforcement fibres. For use as a high build, heavy duty, fibre loaded stripe coating, free from solvent odour that provides durable, long term protection for roofs.
Tordeck DSP is a super-high solids two pack epoxy resin based primer used for the suppression of vapour pressure effects to prevent air/moisture blistering on suspect concrete and asphalt balcony surfaces, suspended decking etc, prior to application of Tordeck two pack systems. Also used in conjunction with Florex Solvent Free Floor Coating.
Thermilate PRO Roof Primer is a water-based primer specially formulated to prepare clay roof tiles for painting with Thermilate PRO Insulating Roof Coating. Thermilate PRO Roof Primer aids adhesion by producing a bond between clay roof tiles and Thermilate PRO Insulating Roof Coating to avoid flaking or peeling.
Gaco Liquid Roof Tape is a thick, high-build, rubber-like liquid comprised of 100% silicone and microfibers. The unique properties allow it to replace traditional rubber and mesh seam tape when used in conjunction with GacoPro Roof Coating.
Tor Elastaseal Z Embedment Coat (RC140) is a cold applied single pack, ultra high solids moisture activated elastomeric urethane coating free from solvent odour. For application in conjunction with Elastamat glass fibre reinforcement as the basecoat in Elastaseal Z roof waterproofing membrane systems. A high build, heavy duty coating, providing durable,...
Tor Elastaseal Z Metal Primer (RC145) is an Epoxy/Polyamide binder with anti corrosive and inorganic pigments and thinned with Alcohol solvents. A low odour, high performance two pack epoxy primer for manually cleaned steel. Particularly of interest in “safety” areas where “blast cleaning” is not allowed.
A specially-formulated primer for application on to metals to enhance adhesion properties, and allow the primer to physically bond onto the metal using an incorporated activating acid that "etches" into the substrate. Advantages For Aluminium, Copper and Galvanised Steel surfaces. White in colour. Upto 12-months shelf life.
Strong roof trims that produce a beautiful finish with pre-made corners that allow effortless change between a raised edge and drip detail. Made using "E" type glass reinforcement encapsulated in thermo set polyester resin to give outstanding life expectancy and performance.
Britannia Hi-Bond Asphalt Adhesive is a high adhesive bonding agent for use between asphalt and conventional building substrates. Eliminates the need for traditional methods of surface preparation: roughening, scrabbling, rendering and mechanical fixing. Advantages Water-based modified rubber solution Safe and eco-friendly Orange in colour For...