Tor Non-Taint Bitumen Primer
  • Tor Non-Taint Bitumen Primer

Tor Non-Taint Bitumen Primer

IM902

Tor Non-Taint Bitumen Primer (IM902) is a general purpose bituminous paint that can be used for steelwork, haysheds on farms etc. Also used for promoting adhesion of TorVap VCL / CM on Elastatherm TF square edged insulation, porous surfaces or in all cases where temperature is below 5°C.


Shipping Options (Select at Checkout):

Economy Shipping (7-14 Working Days): £10 +VAT

Colour
Size
Finish
£32.24
VAT excluded

£38.68 Tax incl.
Quantity

Description

Tor Non-Taint Bitumen Primer (IM902) is a general purpose bituminous paint that can be used for steelwork, haysheds on farms etc. Also used for promoting adhesion of TorVap VCL / CM on Elastatherm TF square edged insulation, porous surfaces or in all cases where temperature is below 5°C.

Surface Preparation

Steel: Minimum acceptable is mechanical wire brushing etc to give Swedish ST2 Standard.

Apply the first coat and work it well into the steel surface using a brush – allow to dry. When hard dry apply a heavier second coat and “lay off” in one direction.

Limitations

  • Film may be subject to slight crazing in very hot weather.
  • Cannot be overcoated with conventional paints without typical bitumen bleed discolouration.
  • Has poor resistance to oil and solvents.
  • Allow 7 days drying before refilling tank with water. Allow to stand for 24 hours – discharge and then re-fill.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
IM902

Data sheet

Application
Brush, Roller, Spray
Coverage
12.5m² per litre
Touch Dry
2 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Anne Bearne on 2018-12-11 10:22:50
Question: 

What do I use to clean the brush with after using the Bitumen paint?


Question about the product

* Required fields
(read)
Send