Britannia Hi-Bond Asphalt Adhesive
    • Britannia Hi-Bond Asphalt Adhesive
    • Britannia Hi-Bond Asphalt Adhesive
    • Britannia Hi-Bond Asphalt Adhesive

    Britannia Hi-Bond Asphalt Adhesive

    HIGH
    BRI3104

    Britannia Hi-Bond Asphalt Adhesive is a safe water-based and eco-friendly bonding agent for use between asphalt and conventional building substrates.

    • Eliminates the need for traditional methods of surface preparation i.e. roughening, scrabbling, rendering and mechanical fixing
    • High adhesive bonding of asphalt products to building substrates such as concrete, cement render, brick and various metals
    • Suitable for use with hot and cold applied bituminous compounds
    • Can be brush, roller or spray applied
    • One pack product

    Colour
    Size

    £51.13 (incl. VAT)

    £42.61 (ex. VAT)

    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Britannia Hi-Bond Asphalt Adhesive is a one pack water-based adhesive which eliminates the need for traditional methods of surface preparation i.e. roughening, scrabbling, rendering and mechanical fixing.

    The water-based modified rubber solution provides high adhesive bonding between asphalt and conventional building substrates. It is also suitable for use with hot and cold applied bituminous compounds.

    Safe and eco-friendly.

    Note: Do not use as a primer for roof coatings.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Water-based
    • One-pack
    • High adhesive bonding of asphalt products to building substrates such as concrete, cement render, brick and various metals
    • Eliminates the need for traditional methods of surface preparation
    • Suitable for use with hot and cold applied bituminous compounds
    • Safe and eco-friendly
    • Can be brush, roller or spray applied



    Spreading Rate


    These will vary depending on substrate, the site conditions and longevity required.

    Typically spreading rates will vary depending on the end use.

    • Up to 5 square metres per litre on concrete/brick work and up to 10 square metres per litre on smooth surfaces
    • Vertical surfaces will tend to take a slightly heavier application



    Drying Times


    • Britannia Hi-Bond must be allowed to dry thoroughly before proceeding with asphalt or bituminous application



    Preparation


    • The surface must be dry and free of loose and friable materials and all fungal and algal growth removed



    Application


    • Do not thin
    • Shake the can well before use
    • Please follow the coverage rates shown in Spreading Rate Section
    • Application temperature should be between 5°C and 25°C
    • Do not apply in wet or frosty weather
    • Apply a coat of Britannia Hi-Bond to the prepared area and bond the surface to it immediately
    • Britannia Hi-Bond is pigmented orange to assist in obtaining an even application



    Cleaning


    • Clean all equipment immediately with water after use



    Shelf Life & Storage


    • Up to 12 months if stored correctly in an unopened container
    • Store above 5°C



    Precautions


    • Keep out of reach of children
    • In case of contact with eyes wash immediately with plenty of water
    • Remove splashes from skin with soap and water or a recognised hand cleaner
    • Protect from freezing
    • Do not apply paint if there is a risk of heavy rain or frost
    • Do not use near fishponds
    • Harmful to aquatic organisms
    • May cause long term adverse effects in the aquatic environments



    Product Details
    3104-418135

    Data sheet

    Manufacturer
    Britannia
    Interior / Exterior Use
    Exterior Use
    Water / Solvent Based
    Water
    For Use On
    Concrete, Render, Brick, Metal
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Single
    Pack Size
    5L, 20L
    UN Number
    N/A
    Base Type
    Water-Based
    Suitable For Use On
    Render
    Suitable For Use On
    Metal
    Suitable For Use On
    Brick
    Suitable For Use On
    Concrete
    Product Usage Type
    Adhesive
    Colour Family
    Orange
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Britannia Hi-Bond Asphalt Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT