Tor Elastaseal Z Binder Sealer (RC144) is a two component, moisture curing polyurethane resin solution for use as an all-aliphatic stabilising sealer and primer on a wide range of substrates such as concrete, asphalt, bitumen, felt, asbestos, plaster, render, etc.
Rust-Oleum Mathys Dacfill / Dacfill HZ Fleece
Rust-Oleum Mathys Dacfill / Dacfill HZ Fleece is a polyester woven mesh, flexible and elastic which is specified for use as a system with Dacfill HZ flat-roof coating. Reinforcement fleeces provide added durability, flexibility and strength to flat-roofs.
Rust-Oleum Mathys Dacfill / Dacfill HZ Fleece is a polyester woven mesh, flexible and elastic which is specified for use as a system with Dacfill HZ flat-roof coating. Rust-Oleum Mathys Dacfill / Dacfill HZ Fleece is also used in conjunction with other roof coatings in the Rust-Oleum range.
The application of Rust-Oleum Mathys Dacfill / Dacfill HZ Fleece is typically done by rolling/brushing 2 coats of roof coating through the porous fleece which bonds to the surface of the flat-roof. Please see the video demonstration below for more information.
Rust-Oleum Mathys Dacfill / Dacfill HZ Fleece provides maximum durability, flexibility and strength. When combined with a suitable coating, Rust-Oleum Mathys Dacfill / Dacfill HZ Fleece offers a flat-roof system that is expected to last for 15 years!
Please watch the following video demostration on how to apply the fleece...
- A fraction of the cost of re-felting or re-roofing
- 15 years maintenance free life expectancy
- Water-resistant soon after application
- Quickly recoatable
- Super-elastic and hard-wearing
- 100% watertight and vapour-permeable
- Waterborne formula
- Resistant to UV radiation, acid rain, heat, frost and pollution
- Easy to apply with a brush, roller or airless spray
- Excellent resistance to major changes in temperature
Be the first to ask a question about this product!
Tor Elastaprime (RC100) is a high performance universal primer that provides excellent binding and adhesion to most substrates including plastics, wood, mineral substrates, ceramic tile, copper, zinc, brass, steel, galvanised steel, aluminium etc. Tolerant of low temperature/high humidity conditions. Used in conjunction with Tor Elastaseal, Elastadeck and...
A specially-formulated primer for application on to metals to enhance adhesion properties, and allow the primer to physically bond onto the metal using an incorporated activating acid that "etches" into the substrate. Advantages For Aluminium, Copper and Galvanised Steel surfaces. White in colour. Upto 12-months shelf life.
Tor Non-Taint Bitumen Primer (IM902) is a general purpose bituminous paint that can be used for steelwork, haysheds on farms etc. Also used for promoting adhesion of TorVap VCL / CM on Elastatherm TF square edged insulation, porous surfaces or in all cases where temperature is below 5°C.
GacoFlex E5320 2-Part Epoxy Primer/Filler is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered...
SikaSeal Lead & Gutter is a low modulus, neutral cure sealant specifically designed to give exceptional adhesion to soft metals such as lead, brass etc. The product is specially formulated as an alternative to mortaring Lead Flashing and Sheet into Brick, Stone and Concrete. Will not stain or corrode soft metals unlike most conventional sealants, low dirt...
Sika Concrete Primer is a two component, rapid curing, high solids, solvent based polyurea primer, for use with Sarnafil Liquid Detailing System. Sika Concrete Primer is a two-component primer for consistent and durable adhesion between Sikalastic 621 TC and cementitious substrates.
A metal primer for ferrous metals such as iron and steel that offers sound anti-corrosion properties and superb capacity and coverage. Can be used over existing paintwork. Examples of Use Bridges Metal artwork Metal trusses Warehouses Factories
This roof primer from Britannia is ideal for porous roofs, and roofs which may break into smaller pieces if pressure is applied, such as concerete, asbestos cladding, sheeting and guttering. Will also prime fibre cement corrugated sheet. Advantages Cures in 1 day Waterproofs instantly Solvent-based 2-year shelf life
Tor Elastaseal Z Fibretex (RC142) is a cold applied single pack, high solids, moisture activated, elastomeric urethane coating, containing inert reinforcement fibres. For use as a high build, heavy duty, fibre loaded stripe coating, free from solvent odour that provides durable, long term protection for roofs.
Tor Raincoat APA (RC353) is a single pack coating based on a specially modified acrylic resin system containing anti-corrosive pigments and inert extenders. Tor Raincoat APA is an adhesion promoting and anti corrosive intermediate coating for use in conjunction with Raincoat roof coatings and cladding finishes over PVDF and other plastic coated substrates.
Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal, fibre-cement etc)...
Tor Elastamat Regular (SS6000116 / SS6000025RL / SS6000830) is a random weave chopped strand glass fibre mat (nominal 100g/m²) for the reinforcement of Tor liquid applied roof waterproofing systems. It is used as a full reinforcement on flat roof applications and where ponding is evident, and as localised or partial reinforcement in other areas.
Thermilate PRO Roof Primer is a water-based primer specially formulated to prepare clay roof tiles for painting with Thermilate PRO Insulating Roof Coating. Thermilate PRO Roof Primer aids adhesion by producing a bond between clay roof tiles and Thermilate PRO Insulating Roof Coating to avoid flaking or peeling.