Cromar Glass Fibre Jointing Bandage is used to tape joints and seams on GRP roofs. The strands of the glassfibre are held together by an emulsion binder to form a mat, and are used as part of the Cromar Pro GRP Roofing System.
Cromar Glass Fibre Jointing Bandage is used to tape joints and seams on GRP roofs. The strands of the glassfibre are held together by an emulsion binder to form a mat, and are used as part of the Cromar Pro GRP Roofing System.
75mm x 75m length, approx. 2.5KG.
TRIMS - BANDAGING:
Where the trims meet the deck 75mm bandage can be applied
Bandage is supplied in rolls approximately 73m long and can be applied directly from the roll
Dip the 3” application roller into the catalysed resin and run it down the trim/deck join, half on the trim and half on the deck approximately 1 metre at a time
Unroll the bandage into the resin and then repeat the process until that ‘run’ of trim has bandage in place
Return to the start and impregnate the bandage with a further coat of resin
Once again, when complete, return to the start and using the laminating roller (3”) consolidate and distribute the resin through the bandage using light pressure until the bandage is transparent (wet out)
Any white areas will need further resin adding
Always ensure the bandage covers the nail heads on the trims and check that where the trim edge meets the deck there is no pin holing due to lack of resin
When changing direction, tear the bandage and overlap it but not until the first bandage is wet out
Never apply ‘dry on dry’
Any joins in the trims should be bandaged in the same way
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Cromar Glass Fibre Jointing Bandage is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Cromar PRO-GRP Chopped Strand Matting, a high performance glass fibre chopped strand matting, with strands bonded with a styrene-soluble emulsion binder. The fibreglass matting is sandwiched between two layers of PRO GRP Resin.Outstanding handling and moulding properties Characterised by fast wet-out and wet-through Easy air removal...
Cromar GRP Finishing Tissue 100mm x 250m, part of the Cromar Pro GRP Roofing System, for neat finishes on visible moulded corners and tidying up details on roof penetrations. More Information Delivery Info
Cromar Application Tools are a range of application tools and accessories for use when applying products from the Cromar range. Range includes:Resin Rollers and Refills Bubble Buster Rollers GRP Paint Brushes Mixing and Graduating Buckets Applicator gunsMore Information Delivery Info
A handy kit containing everything required to install GRP for a 13 sqm roof. Roofing kit contains: 1 x 20kg Pro GRP Resin 1 x 10kg Pro GRP Top Coat 1 x 450 Fibre Glass Matting 6.75kg (approx.)Includes GRP Accessory Kit (see further below for full contents) GRP roofing trims required (sold separately) Cold applied - no heat...