Kovertek GRP Roof Trims are manufactured in the UK using quality resin and glass fibre. All trims are finished in a light grey colour and cut to a 2.5m length, designed for ease of handling and to reduce waste.
TekGuard trims have a high adhesion mat finish to the outer face providing a strong bond between the Trim and TekGuard Flexi-GRP.
Features & Benefits
Standard 3m length
Consistent weight and thickness
Easy jointing - simple overlap by 50mm
Ordering References
See images above and, in the Data Sheets Tab, the brochure and information sheet for detailed dimensions.
Item/Ref
Colour/Size
Description
Flat Edge Trim A170
Light Grey 3mtr* (*previously available in 2.5m lengths)
These trims are fitted to the lowest point of the roof where water should flow into the gutter allowing for drainage.
Flat Edge/Drip Trim A200
Light Grey 3mtr
Flat Edge/Drip Trim With Return A200A
Light Grey 3mtr
Flat Edge Drip Trim A250
Light Grey 3mtr
Raised Edge Kerb Trim B240
Light Grey 3mtr
Raised edge trims are used to channel rainwater away from the edges to the guttering. Fascia should be pre-fitted with batten to ensure the trim is supported.
Raised Edge Kerb Trim B260
Light Grey 3mtr
Raised Edge Trim B300
Light Grey 3mtr
Simulated Lead Flashing C100
Lead Grey 3mtr
Simulated lead flashing trims with two different depths - these are used to finish the D260 wall fillet, seal the chase with Fix-All Adhesive.
Simulated Lead Flashing C150
Lead Grey 3mtr
Wall Fillet Trim D260
Light Grey 3mtr
Wall fillet is used up abutment walls allowing for expansion around the roof.
Pre-formed Expansion Joint E280
Light Grey 3mtr
Used on both the creation of expansion joint on roofs 50m2 and above.
EasiRib 40mm High / 30mm Peak ER40/30
Light Grey 3mtr
Trim used to create raised rolled lead joint effect.
90 deg External Angle G150
Light Grey 3mtr
For use in areas such as walls and steps when the laminated surface sits flat to a perpendicular surface. Finishing on the G trims is on the outer face.
Mini Gutter Profile G180
Light Grey 3mtr
G180 Gutter trim is used for creating a drainage channel. The deck needs to be cut for the trim to sit in. The gutter trim is also used to create an expansion joint on areas larger than 50m2.
90 deg External Angle G275
Light Grey 3mtr
For use in areas such as walls and steps when the laminated surface sits flat to a perpendicular surface. Finishing on the G trims is on the outer face.
90deg Internal Angle H150
Light Grey 3mtr
For use in areas such as walls and steps when the laminated surface sits flat to a perpendicular surface. Finishing on the H trims is on the inner face.
90deg Internal Angle H275
Light Grey 3mtr
35/50 Flexible Internal Angle J170
Light Grey 3mtr
35/50 Flexible External Angle J170A
Light Grey 3mtr
60/70 Flexible Internal Angle J280
Light Grey 3mtr
35/50 Flexible Internal Angle J380
Light Grey 3mtr
For use on internal angles between 35° and 50° from a flat surface.
Coping / Capping Trim K130
Light Grey 3mtr
Coping / Capping Trim K65
Light Grey 3mtr
F300 flat sheet 300mm x 20mtr
Light Grey 3mtr
Preformed flat GRP rolls for use when waterproofing between flat and pitched roof trusses, as well as other areas shown in the trim guide.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
KoverTek GRP Roof Trims is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
KoverTek’s TekGuard is designed to simplify the application process and speed up working time both on existing and new roof surfaces, a system that eliminates the need for using separate GRP resin and Topcoat. A complete resin roofing system.
15-year (300g CSM), 20-year (450g CSM) or 25-year (600g CSM) Materials Guarantee when installed...
Kovertek Chopped Strand Matting, 300g/450g/600g chopped strand Mat (CSM) used to create a stronger membrane, giving a range of different TekGuard guarantees.
Consistent quality, thickness and strength
Rapid wet out and air release
Excellent formability for small radius moulds
Excellent mechanical properties
More Information Delivery...
Kovertek TekGuard GRP Liquid Catalyst is used to start the reactive curing process for TekGuard Resin and Primer. Available in both ‘Standard’ and ‘Winter’ versions which means you can adjust for use all year round.
Please Note: Between the months of March and November the Winter Grade version of this product is subject to a 7-10 working day...