Everbuild 907 Solar Reflective Aluminium Paint
A fast drying, solvent based, light and heat reflective paint to protect and prolong the life of roofs and roof repairs. A thin bituminous-based aluminium protective paint of brushing consistency which dries to a silvery finish.
Everbuild 907 Solar Reflective Aluminium Paint is a light and heat reflective paint to protect and prolong the life of roofs and roof repairs. It is a thin bituminous-based aluminium protective paint of brushing consistency which dries to a silvery finish.
Everbuild 907 Solar Reflective Aluminium Paint can be used to protect primed metal and bituminious coatings against damage from harmful UV rays.
- Fast drying times
- Prolongs life of roof repairs
- Resists UV light
- Reflects heat
- Use on bitumen and primed metal
Please note: This product is ready to use and should not be thinned.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||6m² per litre|
|Touch Dry||2 hours|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|ALAN on 02/03/2018|
can I apply Everbuild Solar Reflective Paint onto new marine ply (bare wood ) to achieve a weather proof coat
|albert Perrott on 24/06/2017|
Just completed my application of 907 Solar Reflective Alum Paint, excellent! Do I need a second application (got plenty over).
Apply two coats by brush or mohair roller, the second coat being applied as soon as the first coat is dry (1-2 hours).
Over bituminous surfaces, apply the thinnest first coat necessary to obliterate the black colour of the bitumen. The second coat should also be thin. Avoid ponding. When brushing, use soft bristle brushes applying the lightest pressure.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close