Cromar Aluminium Paint (Contractor Grade)

    CRO5295

    Cromar Aluminium Paint (Contractor Grade), an economy version of Aluminium Paint ‐ a bright aluminium, traditional, solar reflective coating suitable for application to bituminous roofing substrates.

    • Ideal for protection against sun and weathering of roofs
    • Covers approximately 5 - 10m² per litre per coat, depending upon the surface
    • Dries in up to 72 hours dependent on the ambient temperature
    • Apply by brush or airless spray
    • Not for use in temperatures less than +5°C

    Colour
    Size

    £80.57 (incl. VAT)

    £67.14 (ex. VAT)

    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Cromar Aluminium Paint (Contractor Grade), an economy version of Aluminium Paint ‐ a bright aluminium, traditional, solar reflective coating suitable for application to bituminous roofing substrates.

    Ideal for protection against sun and weathering of roofs, particularly where bituminous, exposed steel and corrugated iron surfaces are encountered.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • An economy version of Aluminium Paint
    • Bright aluminium
    • Solar reflective coating
    • Suitable for application to bituminous roofing substrates
    • Ideal for protection against sun and weathering of roofs



    Coverage Rates


    Approximately 5 – 10m² per litre per coat, depending upon the surface.



    Drying Time


    Up to 72 hours dependent on the ambient temperature.



    Method of Application


    By brush or airless spray.



    Application Instructions


    • Surfaces should be clean, dry and free from dust and debris.
    • Freshly applied bitumen coatings should be allowed to weather for at least 3 – 5 days prior to the application of Aluminium Paint (Contractors Grade).
    • For use on Roofing Felt it is recommended you prime the surface prior to applying the first coat of Aluminium Paint (Contractors Grade).
    • STIR THOROUGHLY BEFORE USE

      Note: The appearance of a silver film on the surface of the paint after a short period of stirring does not signify that the paint is thoroughly uniform. It is advisable to stir for several minutes to ensure complete dispersion. Preference should be given to mechanical stirring.

    • Two coats should be applied, the first being allowed to dry before application of the second. To avoid bronzing it is important that Aluminium Paint (Contractors Grade) is not applied too thickly. Do not brush excessively as this can cause softening of the substrate.
    • The presence of moisture on the surface of rain falling before the Aluminium Paint (Contractors Grade) has dried can also cause bronzing.
    • Do not use in temperatures less than +5°C.



    Cleaning Tools


    Clean with White Spirit.



    VOC Details


    EU Limit for this product CAT. 2(i) : 500g/l (2010). This product contains max. 410g/l VOC’s.



    Storage Conditions


    Store away from children. Containers must be kept sealed and stored under cover away from sources of heat and ignition. Do not allow water to contaminate the Aluminium Paint.



    Shelf Life


    12 months under good storage conditions in original unopened containers.



    Technical Data


    Technical Data
    Flash Point40°C
    Viscosity0.045 mPas
    Relative Density0.94
    OdourAromatic



    Product Details
    5295-916922

    Data sheet

    Manufacturer
    Cromar
    For Use By
    Consumer Use
    Interior / Exterior Use
    Exterior Use
    Water / Solvent Based
    Solvent
    For Use On
    Bitumen, Felt, Steel, Iron
    Application Method
    Brush, Spray
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Single
    Pack Size
    1L, 2.5L, 5L, 25L
    Coverage
    5 - 10m² per litre per coat
    Recommended Thinner/Cleaner
    White Spirit
    Min. Application Temperature
    5°C
    VOC
    410g/l
    Shelf Life (from date of manufacture)
    Shelf Life
    UN Number
    UN 1263
    Drying time
    Up to 72 hours dependent on the ambient temperature
    Suitable For Use On
    Roofing Felt
    Suitable For Use On
    Corrugated Iron
    Suitable For Use On
    Steel
    Suitable For Use On
    Bituminous Roofs
    Application Method
    Spray
    Application Method
    Brush
    Usages
    Solar Reflecting
    Product Usage Type
    Topcoat
    Colour Family
    Grey
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Michael Hines on 2022-11-23 09:42:29
    Question: 

    Hi, will this paint be suitable to use on MDPE? If not can you recommend a solar reflective paint/primer combination that will? Cheers, Michael

    Answer from Rawlins’ Technical Team: 

    No, unfortunately we do not have a paint for application to MDPE.


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Cromar Aluminium Paint (Contractor Grade) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT