Tor Anti-Climb Paint

    DM409

    We no longer stock this product, but can recommend Blackfriar Professional Anti Climb Paint as a great alternative.

    Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

    Tor Anti-Climb Paint, a thick, non-drying paint for parapets, downcomers, pipes, walls, fencing, etc, that makes surfaces virtually unclimbable, deterring would-be intruders, burglars and vandals.

    • Lightly pigmented Petroleum Wax
    • Anti-vandal coating
    • Coats hands and clothing
    • Apply 1 coat by stiff nylon brush or lambswool mitt
    • Only apply to areas above 6ft from ground level in order to avoid accidental contact

    Quantity
    Product not available
    This Product has been Discontinued

    Description

    Tor Anti-Climb Paint, a thick non-drying coating that deters would-be intruders, burglars and vandals. Use on parapets, downcomers, pipes, walls, fencing, etc, to help prevent climbing on surfaces and improve security on buidings and structures.

    The anti-vandal paint is non-drying, coating intruders clothes, hands etc.



    Features & Benefits


    • Anti-vandal paint
    • Makes surfaces harder to climb, preventing intruders and burglars from accessing areas
    • Use on a wide variety of sufaces, including:
      • Parapets
      • Downcomers and downpipes
      • Pipework
      • Walls
      • Fencing
    • Thick and non-drying - coats hands and clothing
    • Apply 1 coat by stiff nylon brush or lambswool mitt
    • Only apply to areas above 6ft from ground level in order to avoid accidental contact



    Product Information


    Lightly pigmented Petroleum Wax

    Product referenceDM409
    Volume solids100%
    Typical thickness1000 microns
    Theoretical coverage1 square metre per litre
    Practical coverageReduce theoretical coverage by up to 20%
    VOC content8 grams per litre of paint



    Surface Preparation


    All surfaces to be coated must be clean, sound and dry. Porous surfaces should be sealed with 1 coat of Tor Stabilising Solution AK602.

    Bare steel:

    After cleaning to Swedish Standard ST2 should be given one coat of Tor QD Red Oxide Metal Primer AK618.

    Plastic downcomers should be roughened by rubbing with medium grade abrasive paper.



    Application Details


    Mix ratioN/A
    Method of applicationApply 1 coat by stiff nylon brush or lambswool mitt
    ThinnerNot required
    CleanerTor TH10 for cleaning equipment
    Pot LifeN/A



    Storage and Handling


    Store in a safe place out of the reach of children

    Flash point

    • Above 55°C

    Shelf life

    • 5 years in unopened containers



    Limitations


    Only apply to areas above 6ft from ground level in order to avoid accidental contact.

    Will attract a surface layer of dust which will not affect the material’s performance.

    1. Avoid skin and eye contact i.e. wear gloves, goggles, etc
    2. Ensure good ventilation, mechanical if necessary
    3. Store and use away from heat and flame
    4. Do not eat or smoke in the vicinity of work
    5. Wash hands before eating
    6. Refer to supply container for additional warning labels

    Product Details
    DM409

    Data sheet

    Manufacturer
    Tor Coatings
    For Use By
    Consumer Use
    Interior / Exterior Use
    Exterior
    Water / Solvent Based
    Water
    For Use On
    Metal, Plastic
    Application Method
    Brush, Mitt
    Colour
    Standard / Ready Mixed
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Single
    Pack Size
    1L, 2.5L, 5L
    Base Type
    Solvent
    Solvent
    Lightly pigmented Petroleum Wax
    Suitable Substrates
    Metal, plastic
    Key Features
    Thick and non-drying
    Coverage
    1 square metre per litre
    Recommended Thinner/Cleaner
    Tor TH10 for cleaning equipment
    Compatible Primers
    Bare steel - Tor QD Red Oxide Metal Primer AK618
    Solids by Volume
    100%
    VOC
    8 grams per litre of paint
    Shelf Life (from date of manufacture)
    5 years in unopened containers
    UN Number
    -
    Base Type
    Solvent Free
    Components
    1K
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Tor Anti-Climb Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Tor Quick Drying Red Oxide Primer

    Tor Quick Drying Red Oxide Primer prepares steel components and fabrications for overcoating with compatible topcoats, dry and ready in just 1 hour. Can be applied by brush, short pile roller or airless spray.An alkyd binder pigmented with inert inorganic pigments and thinned with an aromatic hydrocarbon solvent blend Not suitable for use...

    Price £46.53 (ex. VAT)
    In Stock and Available for Delivery