Nu-Guard AG Clear Coating is a specially formulated single pack external coating designed to give effective protection against both fly-posting and graffiti.
A one coat application where graffiti will not adhere to the surface. Once dry, graffiti can be removed quick and easy by using warm soapy water, with no reapplication required
Most surfaces can be protected with just one coat, giving quick application and protection from Graffiti and fly posting
250ml samples available on the drop-down menu below
Any RAL colour can be produced for orders of 100lts or more - contact us with your requirements on 0113 2455450 (option 2) or send a message to [email protected]
Nu-Guard AG Clear Coating is a specially formulated single pack external coating designed to give effective protection against both fly-posting and graffiti.
Any RAL colour can be produced for orders of 100lts or more - contact us with your requirements on 0113 2455450 (option 2) or send a message to [email protected]
Features & Benefits
One coat application
Graffiti will not adhere to the surface
Once dry, graffiti can be removed quick and easy by using warm soapy water
No reapplication required
Most surfaces can be protected with just one coat
Coverage rate - One coat @ 8 m² / Litre
WFT – 125 microns, DFT – 95 microns
Touch dry in 1-2 hours, fully cured in 6 hours
Product Details
HPC 07 / HPC 08
Data sheet
Manufacturer
Hydron
For Use By
General Use
Interior / Exterior Use
Exterior Use
Water / Solvent Based
Water
For Use On
Aluminium Siding Fibreglass Glass Brick Marble Stone Tile Granite Concrete Metal Street Signs Stucco Vinyl Siding Wood Compatible Paints
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Can this product be used in temperatures under 10 degrees? I understand that it may increase the curing/drying time. Cheers, Brigid
Answer:
Yes, but application should not take place at temperatures below 5°C or when the relative humidity exceeds 85%.
Ash Patel on 2021-04-01 13:59:22
Question:
Hi, can I paint my new powder coated shop shutters with this NU-GAURD AG CLEAR?
Answer:
Assuming the powder coated shutters are clean, dry, sound and prepared as detailed in the Technical Data Sheet this can be applied in one thick coat.
Helen on 2021-03-31 22:13:20
Question:
Will this product repel water based paints?
Answer:
This product will not repel any paints but once Hydron Nu-guard AG is applied correctly most graffiti can be removed by washing the surface down with water.
Lionel on 2020-06-25 22:22:00
Question:
Can you tell me which thinners if any I can clean brushes after using this coating please. Thank you.
How long do I have to wait before I put another coat on
Answer:
In good drying conditions approximately 4 hours.
Paul on 2019-04-08 13:24:30
Question:
Hi, I want to buy some of your Hydron Nu-Guard AG (Black) and I would like to use a roller which is the best type of roller to use, sponge (gloss type) or wool (emulsion type) of roller.
Answer:
We would recommend a standard medium pile roller for application of Hydron Nu-Guard AG to ensure the correct thickness of coating is achieved. You can purchase roller sleeves via the following link Roller Sleeves
Greg Semla on 2019-02-07 08:07:57
Question:
Hi, I have to secure previously painted door, water base and oil base stain. Can I use Nu guard AG Clear for this job?
Answer:
Yes this should be fine but we would always advise carrying out a small test area to check for compatibility before applying to the whole area.
Marc Dunn on 2019-01-29 18:58:47
Question:
Hi looking to buy 12.5 ltrs of your Nu guard anti vandal paint in a semi Matt finish. I stay in Edinburgh, what is your policy for delivery’s?
Answer:
3 - 5 Working Day Delivery
FREE
2 - 3 Working Day Delivery
£8.00 + VAT
Next Working Day Delivery
£15.00 + VAT
Jas Singh on 2019-01-21 23:27:26
Question:
Hi, I am looking to purchase this product to apply to a newly stained shopfront. What type of finish does this leave? I am looking to retain the natural wood stained finish on the shopfront.
Answer:
Hydron Nu-Guard AG is available in clear with the option of a semi-matt or gloss finish.
jo on 2019-01-17 00:40:11
Question:
I would like to use this as a top coat for an art mural painted with exterior gloss. Would this be suitable? I am looking for a glossy tough finish as I have used anti graffiti top coat before which is quite rubbery with a matt finish which would not be suitable for this project as it dulls the colours.
Answer:
Hydron Nu-Guard AG is available in a gloss finish but it does leave the 'rubbery' feel to the surface as you have explained. A 'hard' feel gloss finish alternative would be Rust-Oleum 4900 Polycoat 2K.
Lisa mahaffey on 2019-01-04 18:16:03
Question:
Hi, If I have used this product and then some years later want to repaint the wall, will the new paint take ok to the surface?
Answer:
Further Hydron Nu-Guard AG could be applied without issue and this is also available in colours if required however other paints would not be able to be used due to potential adhesion issues so we would in that instance recommend complete removal of the Hydron Nu-Guard AG if this was required.
jon hawley on 2019-01-03 18:25:05
Question:
I have a metal painted door that has graffiti on, if i repaint the door and apply this clear coat am i protected? and do i need to use special base coat for the your clear coat to go on to?
Answer:
Hydron Nu-Guard AG should be ideal for your project, no special paints are required to be used for re-painting your door. Once you have cleaned and re-painted as required, apply the Hydron Nu-Guard AG and once dry any subsequent graffiti attacks can be simply cleaned off with water.
Kate on 2018-12-22 09:03:27
Question:
Would the Clear Graffiti Guard be suitable for use on Hardwood Gates that have been treated with Danish Oil
Answer:
No, the Danish Oil would first need to be removed.
Alex on 2018-09-20 07:49:59
Question:
I want to protect a painted mural on a concrete surface from graffiti attack. Is this suitable for the job? I'm worried it might be to 'gel like', ideally i need something that leaves a very thin looking layer, so the mural can still be seen. Thanks
Answer:
Hydron Nu-Guard AG Clear should be fine for your application, it has been used extensively over murals.
David on 2018-08-27 10:57:18
Question:
I would like to apply this to a red brick wall. Is the clear version likely to change the appearance/colour of the wall?
Answer:
Nu-Guard WB Concrete Sealer primes/seals very porous surfaces and prevents the darkening of light substrates prior to the application of Nu-Guard AG.
Jayne parker on 2018-05-24 07:01:21
Question:
We're doing some art work on large wooden boards in emulsion and acrylic paint. Would this product make them water proof too? Or can you apply over varnish?
Answer:
Yes, Nu-Guard AG would also waterproof the surface. We always recommend a test patch is done when apply over murals/artwork to ensure compatibility, adhesion and appearance are all satisfactory before coating the whole area.
Cathy Fox on 2018-04-28 09:23:57
Question:
Is the paint UV-resistant? We need to protect artwork so that it won't fade.
Answer:
Yes it is. It will help protect the underlying paint colours from fading but it wont stop timber from ageing.
victoria widdowson on 2018-03-28 16:42:30
Question:
Would you recommend your anti-graffiti paint be used on surfaces that children play on such as skate ramps? Would it be a safe surface to play on? Can it be used over an anti corrosive primer? many thanks Vic
Answer:
Nu-Guard AG would be great for all vertical surfaces not associated with skating on, the product is slippery when wet due to the silicone.
Peter Clements on 2017-03-17 17:50:50
Question: I want to paint a storage container that has been vandalised with graffiti. I plan to lightly rub down the surface then apply a coat of Nu-Guard AG in a colour. My question is whether the Nu-Guard alone will cover the existing graffiti and provide a consistently coloured surface (as when using conventional paint) or will the metal require an undercoat? The surface is fairly rust free.
Thanks for your help.
Answer:
We would recommend thoroughly cleaning the container and preparing any areas of rusting before applying a coat of Zinsser Cover Stain to all areas. Choose a colour near to what you wish your final colour to be to aid opacity. Allow the Cover Stain to completely cure before then applying Nu-Guard AG.
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
Nu-Guard WB Concrete Sealer is a modified Vinyl Acetate, non-flammable and non-toxic sealer. First coat for Nu-Guard AG.
Prevents the darkening of light substrates prior to the application of Nu-Guard AG
Formulated primarily for use on concrete and brickwork
More Information Delivery Info
Brigid on 2021-04-21 16:25:29
