Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Nu-Guard WB Concrete Sealer is a modified Vinyl Acetate, non-flammable and non-toxic sealer. It is formulated primarily for use on concrete and brickwork. Nu-Guard WB Concrete Sealer primes/seals very porous surfaces and prevents the darkening of light substrates prior to the application of Nu-Guard AG Clear and Coloured Finishes.
Nu-Guard WB Concrete Sealer is a modified Vinyl Acetate, non-flammable and non-toxic sealer. It is formulated primarily for use on concrete and brickwork.
Nu-Guard WB Concrete Sealer is single pack and ready for immediate use. It primes/seals very porous surfaces and prevents the darkening of light substrates prior to the application of Nu-Guard AG Clear and Coloured Finishes.
Ensure surfaces to be treated are clean, free from contamination and dry. All loose materials should be swept away and laitance removed by etching with Nu-Base Acid Etch. The surfaces then should be washed off to provide a clean neutral surface and allowed to dry overnight.
Apply 1 coat by brush, roller or spray @ 8 - 12m² per litre dependant upon the surface porosity.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A high-performance, two-pack, clear anti-graffiti coating for external surfaces. It provides an outstanding permanent and non-sacrificial coating plus an easily cleaned protective surface.
Nu-Guard AG is a unique, one coat anti-graffiti coating that protects all surfaces, including brick, concrete, render, stone, wood and plastic against all types of graffiti and poster glues. It’s been completely re-engineered in England to provide the most vandal resistant finish ever achieved anywhere in the world.
Nu-Cryl® AG is an exceptional and highly durable anti-graffiti coating that is perfect for use on brick, stone and timber. Tested to BS 476 parts 6&7 Satisfies Class '0' requirements of current Building Regulation. Advantages Long-life protection from graffiti Outstanding resistance to weathering and UV No reapplication required Stain resistant...
Sikagard 850 AG is a permanent anti-graffiti and antiflyposter coating for the protection of concrete, wood, masonry and metal substrates. Sikagard 850 AG provides a clear wet-look surface that also brightens and enhances the color of the substrate. The product is based on polyorganosiloxanes and provides excellent performance against exterior elements...
Coo-Var Anti Graffiti Kit is a complete water-based graffiti protection kit for an easy, no-fuss way to prepare, mix and apply a long-lasting protective graffiti finish. Each kit will protect 14-18 square metres with one coat. ADVANTAGES Low odour Low VOC Impact/abrasion resistant Quick and easy protection of one-off areas
A two-pack polyurethane, clear coating and finish lacquer, for steel, non-ferrous metals, wood, concrete & mineral substrates free of contamination, dust, efflorescence and properly prepared. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Resistant to chemicals and weathering Use as an anti-graffiti coating on...
The ideal way to combat unwanted graffiti. Can be applied to masonry, brick, plaster or wood by brush or roller to give a clear gloss finish to enable graffiti to be removed easily with Coo-Var Liquid Graffiti Remover.
A single pack, solvent-free clear anti-graffiti coating that provides a permanent anti-graffiti barrier that can be frequently cleaned without the need to re-apply. 1 coat application for interior and exterior areas.
Nu-Flame AG Colourcoat is a pigmented and smooth fire retardant coating with anti-graffiti properties. Water-soluble, easy to clean and available in BS 4800 shades. Advantages Water-soluble urethane coating. Safe for internal applications. Easy to clean. BS 4800 shades. Graffiti resistant. UV stable. 10-12m²/Litre coverage.
Nu-Cryl® AG Rendercoat is a fantastic anti-graffiti coating that is perfect for applying to render such as stucco, plaster or self-coloured render. Satisfies Class '0' requirements of current Building Regulation. Advantages Long-life protection from graffiti Outstanding resistance to weathering and UV No reapplication required Stain resistant...
A water based, clear permanent anti-graffiti coating with hydrophobic properties for use inside and outside on all porous mineral surfaces, such as concrete, brickwork, and dimension stone.
The ideal way to combat unwanted graffiti. Can be applied to masonry, brick, plaster, wood and previously painted surfaces by brush or roller to give a clear off-gloss finish to enable graffiti to be removed easily with Coo-Var Liquid Graffiti Remover.
Coo-Var GP101 Anti-Graffiti Sealer Coat is a clear sealer for porous surfaces prior to the application of Coo-Var GP101 Graffiti & Flyposting Protection System. ADVANTAGES Water resistance Mildew resistance Minimises ‘darkening’ of stone Acrylic Low odour Non-flammable Low toxicity
Tor Torlife TP Coloured, a 2-pack high performance anti-graffiti, anti-vandal finish coat for the Torlife TP Coloured System, available in over 400 RAL and BS colours. For external surfaces on nearly all building types Use in communal areas and industrial environments Non-sacrificial anti-graffiti finish Extremely durable with UV colour...
A two-coat semi-permanent anti-graffiti system made from polymers and waterbased wax, suitable for all mineral surfaces. Top Features Easy to apply Non-flammable Easy to remove graffiti and recoat High vapour permeability This product is available as POA. Click here to email us for more information
A biodegradable, semi-permanent wax-based anti-graffiti coating developed and manufactured by Rust-Oleum, suitable for use on surfaces in need of protection against graffiti and other pollutants. It instantly forms a sacrificial layer based on natural wax that is suitable for a single cleaning process. Rust-Oleum GraffitiShield Wax should be...
