- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Coo-Var Anti Graffiti Kit
207/Q462/15
Coo-Var Anti Graffiti Kit is a water based polyurethane two pack anti-graffiti coating for interior or exterior use. Low odour and fast drying. WB101 can be used over compatible coloured paints.
Product Features
- For use over stone, brickwork, wood, masonry and existing stable oil or waterbased paint
- Water based
- Low odour and fast drying
- Dries to a hard, easy to clean finish
- Can be used over compatible coloured paints
Kit Includes
- Coo-Var WB101 Anti-Graffiti Coating (2.5lt unit)
- Paint Brush
- Mixer Paddle
- Gloves
- Instructions
Description
Coo-Var Anti Graffiti Kit is a complete water-based graffiti protection kit for an easy, no-fuss way to prepare, mix and apply a long lasting protective graffiti finish. Each kit will protect 14-18 square metres with one coat. It's water based, low odour and low VOC formula makes it ideal for small projects inside and out. Coo-Var Anti Graffiti Kit is great for use over already decorated walls to protect from permanent marking by providing an easy to clean and hygienic surface.
Kit Contains:
- Coo-Var WB101 Anti-Graffiti Coating (2.5lt unit)
- Paint Brush
- Mixer Paddle
- Gloves
- Instructions
Coo-Var Anti-graffiti Kit is the ideal way to combat unwanted graffiti, it can be applied by brush or roller to give a clear off-gloss finish to enable graffiti to be removed easily with Coo-Var Liquid Graffiti Remover.
Recommended Uses
- Wood
- Masonry
- Brick
- Plaster
- Bridges
- Statues
- Walls
- Toilets
Coo-Var Anti Graffiti Kit can be applied to most other conventional paints meaning the user won't have to compromise on the colour scheme or aestheics of the building. Simply clean or paint the surface with the colours or design of your choice then protect it with Coo-Var Anti Graffiti Kit.
Surface Preparation
All surfaces should be laitance free, clean, dry, sound and free from contaminants. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as a new surface then prepare accordingly.
Mixing Instructions
The entire contents of the hardener tin must be added to theresin base and mixed thoroughly, preferably with a low speed drill and mixing paddle for two minutes ensuring the mixing action takes in the full depth and perimeter of the container. Badly activated or incorrectly mixed materials will affect performance and may cause early failure.
Preceding Coat
Apply direct, can be used over most paint surfaces, if in doubt test a small area first.
Subsequent Coat
Apply at least 2 coats of WB10
Do not spray.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
207/Q462/15
Data sheet
- Manufacturer
- Coo-Var
- Interior / Exterior Use
- Exterior
- Water / Solvent Based
- Water
- For Use On
- Concrete, Brickwork,
- Application Method
- Brush, Roller
- Sheen
- Off-Gloss
- Colour
- Clear
- Single, Two or Three Pack
- Two-pack
- Pack Size
- Kit
- Pot Life (at 20°C)
- 2-3 Hours
- Coverage
- 14-18m² per kit
- Recommended Thinner/Cleaner
- Do Not Thin
- Solids by Volume
- 53%
- Touch Dry
- 1-2 Hours
- UN Number
- UN1263
 David Barrett on 2019-09-25 16:08:36 | Question:
Hi can this system when used with the graffiti remover be jet washed off leaving the two pack intact, or do you have to do it by hand thanks |
Answer:
Low pressure jet washing will be fine, do not however steam clean. | |
| Chris Wright on 2018-10-23 13:09:26 | Question: Hi Can you please tell me if I can buy clear for my ruff sawn wooden fencing Because someone keeps spraying paint on it ? Regards Chris |
Answer: Hydron Nu-Guard AG would be suitable for this application, apply 2-3 coats directly to the wood. | |