Rust-Oleum GraffitiShield Hydro
Condition: New product
A water based, clear permanent anti-graffiti coating with hydrophobic properties for use inside and outside on all porous mineral surfaces, such as concrete, brickwork, and dimension stone.
Rust-Oleum GraffitiShield Hydro is a water based permanent anti-graffiti coating with hydrophobic properties. It is easy to apply, virtually invisible, water-vapour permeable, extremely UV resistant, acid and alkali resistant, and long-lasting even after many rounds of cleaning. Rust-Oleum GraffitiShield Hydro will not film over, is strongly repellent of oils and fats (oleophobic), hydrophobic effect, very resistant to solvents and chemicals, and will remain fully intact once graffiti has been removed, allowing for many rounds of cleaning.
Rust-Oleum GraffitiShield Hydro can be applied to all porous mineral surfaces, such as concrete, brickwork, and dimension stone. Rust-Oleum Graffitishield Hydro can be cleaned easily using Rust-Oleum GraffitiShield Cleaner
Features & Benefits
- Virtually invisible
- No film-building
- Excellent UV-resistance
- Water vapour permeable
- Easy to apply
- Waterproof (Hydrophobic)
- Ideal for natural stone
A permanent anti-graffiti barrier allows for multiple graffiti cleaning processes using a special cleaner before the layer itself should be renewed.
In other words ideal for regularly attacked places that require frequent cleaning. It normally consists of several layers to reach the required protection level. Rust-Oleum offers various permanent systems for various substrates outside or inside.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||5-10m² per litre|
|Touch Dry||1 Hour|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close