Graffiti Magic Non-Darkening Sealer
Manufacturer: Graffiti Magic
Helps to prevent or minimise any change in the appearance of the surface intended to be protected with Graffiti Magic. It can also be used to seal very porous substrates to improve the spread rate of the Graffiti Magic protective coating.
Graffiti Magic Non-Darkening Sealer is a clear, water based primer sealer for use on porous substrates prior to the application of Graffiti Magic. Use Graffiti Magic Non-Darkening Sealer where application directly onto the subtrate would result in the ‘wetting out’ or darkening of the surface. Using Graffiti Magic Non-Darkening Sealer helps to prevent or minimise any change in the appearance of the coated surface. It can also be used to seal very porous substrates to improve the spread rate of the Graffiti Magic protective coating.
Graffiti Magic Non-Darkening Sealer can be applied onto a wide variety of porous surfaces (eg. Brick, mortar, concrete, render porous stone and bare timber). It is not suitable for sealed or previously painted surfaces. To test the effectiveness of the Graffiti Magic Non-Darkening Sealer we strongly recommend a small discrete trial application be carried out.
Using a brush, spray or roller apply one good coat of Graffiti Magic Non-Darkening Sealer over a clean, dry substrate, first ensuring that any brick acid/etch cleaner has been thoroughly rinsed off.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||10m² per litre|
|Touch Dry||1 hour|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close