We no longer stock this product, but can recommend Nu-Guard AG as a great alternative.
Graffiti Magic Clear Anti-Graffiti Coating is a quick-drying, anti-graffiti paint which protects suitable substrates against graffiti of all kinds and can be cleaned repeatedly without special chemicals. Its an easily applied, single pack, clear coating available in gloss or matt finish, giving excellent adhesion to recommended substrates. Short drying and re-coating times mean rapid graffiti protection of all kinds can be achieved.
Graffiti Magic Clear Anti-Graffiti Coating can be applied to vulnerable exterior surfaces including concrete, brick, stone, render, timber, metal, cladding and most sound previously painted surfaces. As Graffiti Magic Clear Anti-Graffiti Coating preserves the substrate in the condition in which it is treated, cleaning and/or re-decoration must take place before treatment.
Features & Benefits
- Graffiti Removed with Water
- Anti-Graffiti Paint
- No Chemicals Required
- Warranted for 20 Years
- No Re-application Required
- Fully Breathable
- Class Zero Fire Rating
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||8m² per litre|
|Touch Dry||4 hours|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Mark on 12/02/2018|
Can this coating be removed. I have a client that’s had this applied and now asking for it to be removed. Not sure why they need it removing. The customer is always right! Thanks
Graffiti Magic Clear Anti-Graffiti Coating can be removed by basting i.e. chalk or glass bead. This is the only way to clear ALL Graffiti Magic off a surface if it is on a solid substrate. Using sand or grit is too severe and will possibly damage the substrate under Graffiti Magic. Graffiti Magic can be overcoated by Zinsser B-I-N primer and then decorated over, this will adhere to the surface but will result in reduced overall performance of the system.
|Libby Rutherford on 14/03/2017|
Question: We have an area of newly stained timber cladding in a public area. Is the Graffiti Magic clear coating suitable for this? Would it darken the stain? We'd probably prefer matt, would that be suitable. Thanks.
Graffiti Magic Clear Anti-Graffiti Coating is suitable to be applied over certain wood stains but not varnish. Like most clear coatings Graffiti Magic will darken the appearance of the timber to a degree. We would suggest you carry out a test area prior to full application to ensure compatibility, appearance and performance is acceptable.
|Jerome on 05/03/2017|
Question: Hello, can this be used on interior walls, e.g. school hallways?
Need a matt coating that is exceptionally hardwearing & easy cleanable for interior use.
No Graffiti Magic Clear Anti-Graffiti Coating is not suitable for interior use, instead for interior projects we recommend Rust-Oleum GraffitiShield Polycoat. It is available in a clear, matt finish, is low odour, solvent free and only requires one coat making it very cost effective and safe to use.
|sarah hoskins on 25/10/2016|
Question: Following an attack of graffiti on lime painted stone wall of the local church, the graffiti has been removed with scrubbing. Can we now paint over the lime paint on the cleaned stone walls with your anti graffiti paint? Churchwarden St Mary's Moulsoe
We recommend lime wash surfaces are first primed with a coat of Graffiti Magic Non-Darkening Sealer, before application of Graffiti Magic Clear Anti-Graffiti Coating.
|alan on 05/10/2016|
Question: i have a client who needs a graffiti coating on the walls of decorative posters.
can we apply this coating on posters on plastered wall?
would the chemicals in this be too abrasive for the paper on the walls ?
Providing the wall is sealed behind the posters Graffiti Magic Clear Anti-Graffiti Coating should be OK for this use but we would recommend a test area is carried out prior to full application to check for adhesion, compatibility and appearance.
|John Armstrong on 30/08/2016|
Question: I have large timber gates do they need to be treated before applying the anti graffiti paint.
Graffiti Magic Clear Anti-Graffiti Coating can be applied directly to bare timber but will require multiple coats (usually 3-4) to build up the film build on the surface.
|Jenny on 31/07/2016|
Question: I have an exterior painted brick wall, it has been painted with exterior weather shield masonry paint (white). Is this product suitable for protecting it from graffiti with marker pen?
Answer: Yes, you can apply two coats of Graffiti Magic Clear Anti-Graffiti Coating directly over the dried masonry paint at a coverage rate of 8m² per litre/per coat.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close