Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
A single pack, solvent-free clear anti-graffiti coating that provides a permanent anti-graffiti barrier that can be frequently cleaned without the need to re-apply. 1 coat application for interior and exterior areas.
Rust-Oleum GraffitiShield Polycoat is a single pack, solvent-free anti-graffiti coating based on polyurethane that provides a permanent anti-graffiti barrier for multiple graffiti cleaning processes using a special cleaner before the layer itself should be renewed. In other words, Rust-Oleum GraffitiShield Polycoat is ideal for regularly attacked places that require frequent cleaning without re-application of the coating.
Rust-Oleum GraffitiShield Polycoat is a durable clear coating which is suitable for both indoors and out, for non-absorbent and/or solvent-sensitive surfaces: façade insulation systems, layers of plaster or concrete, but also surfaces which have been treated with acrylic-dispersion paints. This product is not suitable for use on very porous and/or very textured surfaces.
Features & Benefits
All substrates can become subject to a graffiti attack. Cleaning graffiti directly from the original surface can be difficult or even harmful to the substrate. The alternative is to apply a transparent anti-graffiti coat onto the surface, such a barrier coat is easier to clean and even offers protection against UV, dirt build-up, carbonation and wear. Based on this concept, Rust-Oleum introduces the GraffitiShield range - A condensed assortment of functional anti-graffiti products for various substrates and conditions that are easy to use and easy to clean. In other words, saving time, money and worry.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Paul d'Armada on 17/09/2018 |
Question: Can the surface once protected with this anti-graffiti coating, be overpainted easily? |
Answer: In order to ensure good adhesion of any subsequent coatings, Rust-Oleum advise thorough degreasing using a solution of Rust-Oleum Mathys ND14 Cleaner Degreaser, followed by abrading/sanding to provide a suitable physical key prior to paint application. | |
| Colin hurst on 30/05/2015 |
Question: Do you put Rust-Oleum GraffitiShield Polycoat on before or after painting? |
Answer: Rust-Oleum GraffitiShield Polycoat is a clear protective coating that should be applied as the last coat on a surface. It can be applied over a range of surfaces including surfaces previously painted with waterbased acrylic paints to permanently protect from graffiti attack by making the surface easily cleanable. | |
A two-coat semi-permanent anti-graffiti system made from polymers and waterbased wax, suitable for all mineral surfaces. Top Features Easy to apply Non-flammable Easy to remove graffiti and recoat High vapour permeability This product is available as POA. Click here to email us for more information
Coo-Var Anti Graffiti Kit is a complete water-based graffiti protection kit for an easy, no-fuss way to prepare, mix and apply a long-lasting protective graffiti finish. Each kit will protect 14-18 square metres with one coat. ADVANTAGES Low odour Low VOC Impact/abrasion resistant Quick and easy protection of one-off areas
Coo-Var GP101 Graffiti and Flyposting Protection System is a single pack, revolutionary fast-drying, clear coating which offers long term protection against both graffiti and flyposters. ADVANTAGES Apply 2 coats in one day! Wash off with soapy water Apply to rough/smooth surfaces Less ghosting from graffiti remains Fly posters just...
The ideal tool for easy the application of Rust-Oleum GraffitiShield Wax and Hydro. Hiring an airless spray machine or employing a professional to apply these anti-graffiti coatings can be costly. By using the Rust-Oleum GraffitiShield Spray Pump you can save time on application and achieve the same professional finish.
Coo-Var GP101 Anti-Graffiti Sealer Coat is a clear sealer for porous surfaces prior to the application of Coo-Var GP101 Graffiti & Flyposting Protection System. ADVANTAGES Water resistance Mildew resistance Minimises ‘darkening’ of stone Acrylic Low odour Non-flammable Low toxicity
Mathys Pegagraff Hydro is a clear coating designed to protect a range of bare and previously painted surfaces inside and out from graffiti attack. Can be used on floors, walls and other surfaces to create a tough, clear glaze that can be easily and frequently cleaned to remove any unwanted graffiti that may occur.
A biodegradable, semi-permanent wax-based anti-graffiti coating developed and manufactured by Rust-Oleum, suitable for use on surfaces in need of protection against graffiti and other pollutants. It instantly forms a sacrificial layer based on natural wax that is suitable for a single cleaning process. Rust-Oleum GraffitiShield Wax should be...
Nu-Guard WB Concrete Sealer is a modified Vinyl Acetate, non-flammable and non-toxic sealer. It is formulated primarily for use on concrete and brickwork. Nu-Guard WB Concrete Sealer primes/seals very porous surfaces and prevents the darkening of light substrates prior to the application of Nu-Guard AG Clear and Coloured Finishes.
A high-performance, two-pack, clear anti-graffiti coating for external surfaces. It provides an outstanding permanent and non-sacrificial coating plus an easily cleaned protective surface.
Nu-Cryl® AG Rendercoat is a fantastic anti-graffiti coating that is perfect for applying to render such as stucco, plaster or self-coloured render. Satisfies Class '0' requirements of current Building Regulation. Advantages Long-life protection from graffiti Outstanding resistance to weathering and UV No reapplication required Stain resistant...
Nu-Flame AG Glaze acts as the final coat to the Nu-Flame Fire Protection Coating for walls and ceilings, and may also be used to overcoat matt emulsion or masonry paint. Also specially formulated to act as an anti-graffiti coating. Advantages Fire retardant and anti graffiti Water-soluble and non toxic Easy to clean UV stable
A two-pack polyurethane, clear coating and finish lacquer, for steel, non-ferrous metals, wood, concrete & mineral substrates free of contamination, dust, efflorescence and properly prepared. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Resistant to chemicals and weathering Use as an anti-graffiti coating on...
Remmers Graffiti Protection is a watery, semi-permanent impregnation agent on a alkylalkoxysilane / wax basis for protection against graffiti. For use indoors and outdoors on mineral building materials, such as bricks, natural stone, concrete, sand-lime.
The ideal way to combat unwanted graffiti. Can be applied to masonry, brick, plaster or wood by brush or roller to give a clear gloss finish to enable graffiti to be removed easily with Coo-Var Liquid Graffiti Remover.
Nu-Guard® Tack Primer gives you the base coat on which to apply the Nu-Guard AG System to non-porous or existing coatings. Advantages Exceptional adhesion to non-porous surfaces. Primer coat for the Nu-Guard AG System. Touch Dry from 3-4 hours. Water soluble. 12-month Shelf life.
Nu-Guard AG Adhesion Promoter is a clear, modified Vinyl Acetate, non-flammable and non-toxic adhesion primer/sealer. It is formulated primarily for use on glazed tiles and other dense substrates. Single pack ready for immediate use by brush, roller or spray.
