Coo-Var 2 Pack W/B Anti Graffiti Coating
  • Coo-Var 2 Pack W/B Anti Graffiti Coating

Coo-Var WB101 Anti-Graffiti Coating

COO1003

Coo-Var WB101, a water based polyurethane two pack anti-graffiti coating for interior or exterior use, with low odour and fast drying.

  • Ideal for bridges, walls, subways, public toilets and stadiums
  • Can be used over compatible coloured paints
  • Dries to a hard, easy to clean finish
  • Hard dry in 24 hours
  • Click to jump down to Technical Data
Colour
Size
£134.26
VAT excluded

£161.12 Tax incl.
Quantity

Description

Coo-Var WB101 is a water based polyurethane two pack anti-graffiti coating for interior or exterior use, with low odour and fast drying.

Drying to a hard, easy to clean finish, WB101 can be used over compatible coloured paints. Ideal where a water based product is required, WB101 is ideal for bridges, walls, subways, public toilets and stadiums. A case study for an underpass in Milton keynes, Saxonville from 2012 can be downloaded from our "attachments" section above.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Two-pack product
  • For interior or exterior use
  • Low odour
  • Fast drying
  • Can be used over compatible coloured paints
  • Dries to a hard, easy to clean finish
  • Ideal for bridges, walls, subways, public toilets and stadiums



Product Data


Typical Specific Gravity 1.08 @ 20 °C
Volume Solids 53
Wet Film Thickness 185 microns
Dry Film Thickness 100 to 105 microns
Expected Spreading Rate 5 to 8 sq.m / kilo @ 100 to 105 microns D.F.T
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Typical Viscosity N/A
Flash Point 45 °C (closed cup)
Potlife 2 to 3 hours @ 20 °C
Once the parts are mixed together the material has to be used within the time stated.
VOC Content 75 g / litre



Cure Time


@ Recommended D.F.T
Initial cure: 1 to 2 hours @ 20 °C
Hard dry: 24 hours @ 20 °C
Full cure: 5 to 7 days @ 20 °C
Low temperature and high humidity will adversely affect application, curing and performance of any coating.



Application Details


Disposable application equipment is recommended. Ensure that the correct film thickness is achieved as over applying the coating can cause imperfections in the finished film.

Application restrictions Do not apply below 5 °C.
Method Brush or Short pile roller
Thinner (Max vol) Do Not Thin.
Nozzle size N/A
Nozzle pressure N/A
Cleaning solvent Water
Recoat interval Minimum 16 hrs Maximum 72 hrs



Surface Preparation


All surfaces should be laitance free, clean, dry, sound and free from contaminants. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.



Mixing Instructions


The entire contents of the hardener tin must be added to the resin base and mixed thoroughly, preferably with a low speed drill and mixing paddle for two minutes ensuring the mixing action takes in the full depth and perimeter of the container. Badly activated or incorrectly mixed materials will affect performance and may cause early failure.



Application Conditions


Air temperature 5-30°C, Humidity 85% RH maximum, non condensing conditions.



Preceding Coat


Apply direct, can be used over most paint surfaces, if in doubt test a small area first.



Subsequent Coat


Apply at least 2 coats of WB101

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
COO1003

Data sheet

Manufacturer
Coo-Var
Water / Solvent Based
Solvent
Water / Solvent Based
5 to 8 sq.m / kilo @ 100 to 105 microns D.F.T
For Use On
Concrete, Brickwork
For Use On
75g / litre
Application Method
Brush, Roller
Application Method
100 to 105 microns
Colour
Clear
Colour
185 microns
Single, Two or Three Pack
2-3 hours
Single, Two or Three Pack
Single
Pack Size
5 to 7 days
Pack Size
1KG, 5KG
Touch Dry (at 20°C)
1 to 2 hours
Coverage
53
Touch Dry
1-2 Hours
Dry for Topcoat (at +20°C)
Minimum 16 hrs
UN Number
5-7m² per KG
Specific Gravity
1.08 @ 20 °C
Hard Dry
24 hours (at 20c)
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Gary Trull on 2019-07-29 08:22:56
Question: 

Can Coo-Var WB101 Anti-Graffiti Coating be used on painted garage doors (Metal)

Answer: 

Yes, before applying existing painted surfaces should be compatible, cleaned, degreased and sanded to ensure an adequate "key" is produced.

questions Emma Bailey  on 2019-06-07 11:08:49
Question: 

Hello Can your product Coo-Var WB101 Anti Graffiti coating be used on top of Acrylic paint on external brick work? Will it yellow with age and how much meter coverage can be got from one tin of 5kg of the product? Many Thanks for your time Emma

Answer: 

Coo-Var WB101 Anti-Graffiti Coating can be used over water based acrylic paint externally, as it’s clear it won’t yellow but it won't stop the acrylic itself yellowing if this isn't UV stable. Spreading Rate is 5-8 sqm/kg.

questions Alexandra Ghimisi on 2017-12-11 11:01:08
Question: I am a mural painter and need a product to varnish my art work. It is painted indoor with acrylic paint. I want to try your product-COO-VAR WB101 because of its properties and mainly because is off-gloss. My questions are: 1. Has it a matt finish? 2. Has it a non-yellow finish in time? 3. Can be applied on top of a gloss varnish already I've applied? 4. For how many years is it guaranteed? Thank you, Alexandra G.
Answer: 

We would advise carrying out a test for compatibility with Rust-Oleum 4900 Polycoat 2K. This is available in a matt finish (Coo-Var WB101 Anti-Graffiti Coating is a glossy finish), Rust-Oleum 4900 Polycoat 2K does not yellow and can be used internally and externally over various pre-painted surfaces.


Question about the product

* Required fields
(read)
Send