Blackfriar Professional Anti Graffiti Lacquer
Manufacturer: Blackfriar Professional
A high-performance, two-pack, clear anti-graffiti coating for external surfaces. It provides an outstanding permanent and non-sacrificial coating plus an easily cleaned protective surface.
Blackfriar Professional Anti Graffiti Lacquer is a high-performance, two-pack, clear anti-graffiti coating for external surfaces. It provides an outstanding permanent and non-sacrificial coating plus an easily cleaned protective surface.
Features & Benefits
- Allows for easy removal of permanent marker, aerosol and conventional paints.
- For use on all types of external surface including wood, brick, concrete and natural stone.
- Clear, hardwearing solvent-borne lacquer.
- Two pack, non-sacrificial coating.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|osagie on 07/09/2018|
Hi , i just want to know if it works on woods like ply wood. I want to protect my companies doors from permanent markers and pen inks? How do i clean of these stains, hope i don't need another solvents? Thanks
Blackfriar Professional Anti Graffiti Lacquer can be used on hardwoods and plywood but not suitable over softwoods (even if previously painted). If applying over existing hard/glossy paint, abrade the surface with a fine abrasive paper to flatten down. Bare porous surfaces must be completely dry before the application of Blackfriar Professional Anti Graffiti Lacquer (if in doubt use a moisture meter). A graffiti removal chemical would need to be used to remove any graffiti attacks after application of this coating.
Nu-Guard AG however is a unique anti-graffiti coating that protects all surfaces, including brick, concrete, render, stone, wood and plastic against all types of graffiti and poster glues. Once coated with Nu-Guard AG, nothing can stick to the surface. Nu-Guard AG is completely resistant to all paints, permanent markers and the majority of acids. Simply wash with water and graffiti disappears and posters just slide off, providing permanent protection against graffiti attack – without ghosting residue.
|Glyn on 26/07/2018|
Dear peeps, We have just had an artist paint some metal panels in our local park using spray paint. It’s so beautiful we’d like to protect it, and we’re wondering if your anti graffiti lacquer is suitable to use on top of spray paint painted upon metal. Any help appreciated Many thanks Friends of eastville Park Bristol.
The solvents in Blackfriar Professional Anti Graffiti Lacquer are likely to attack and dissolve the spray paints.
Torlife WB satin PU865 or gloss PU862 clear lacquer could be used instead. This is a water based 2 pack and therefore less likely to react with the spray paints. You should still do a small test patch first, leave it for 15 minutes and check to see if it has had any effect on the edge detail of the spray paint. If it is OK after 15 mins you can carry on and paint the rest of the installation.
Assuming the metal surface is smooth, 2 coats of the lacquer would be required. If it is a rough textured surface, 3 coats of the Torlife WB should be allowed for.
As these alternatives are not listed currently on our website, please contact our sales team for pricing on 0113 2455450.
|K&A Restoration LTD on 25/07/2018|
Hi I want to buy brick lacquer from you. I want to know did you sell it with activator together and do i need some base before that?
Each 5lt unit contains base and activator when purchased.
On bare porous surfaces first apply Blackfriar Professional Water Based Floor Sealer followed by 2 coats of Blackfriar Professional Anti Graffiti Lacquer. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp. Do not apply in cold (below 5°C), damp or humid conditions. Can be used on hardwoods and plywood but not suitable over softwoods (even if previously painted). Do not apply directly to metal. If applying over existing hard/glossy paint, abrade the surface with a fine abrasive paper to flatten down. Bare porous surfaces must be completely dry before the application of Blackfriar Professional Anti Graffiti Lacquer (if in doubt use a moisture meter). Not suitable for use over masonry paints.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close