Coo-Var Glocote Protective Coat is a clear glaze which can be used to protect the exterior performance and prolong the colour retention of Coo-Var Glocote Fluorescent Paint ADVANTAGES Prolongs colour retention Protects from weathering Increases the all-round durability Extends the life expectancy of the system outdoors Extra protective...
Coo-Var Glocote Fluorescent Paint
A high visibility, day time coating or under lights at night to identify hazards or safety equipment such as fire extinguishers and exits. Ideally used in a system with Glocote Foundation.
- Apply to wood, metal, masonry or GRP
- High visibility
- 5 Colours
- Ideal for highlighting hazards
- Great safety identification
Coo-Var Glocote Fluorescent Paint is a high visibility, day time coating or under lights at night to identify hazards or safety equipment such as fire extinguishers and exits.
- Sign writers
- Stage crews
- Low beams
- Fire equipment
- Escape routes
Coo-Var Glocote Foundation is a high-density white base coat that should be used under Coo-Var Glocote Fluorescent Paint to increase the visibility. The white base coat provided by Coo-Var Glocote Foundation is essential for Coo-Var Glocote Fluorescent Paint to function properly. Coo-Var Glocote Protective Coat is available to enhance the durability when used externally, on floors to mark escape routes, or surfaces exposed to physical and chemical wear.
Apply by brush, roller or spray.
Brush washing/Thinners – White spirit
12 hours or overnight
Works best as part of a system with Glocote Foundation and Glocote Protective.
Recommended Dried Film Thickness Per Coat: 30-35 microns
Recommended Wet Film Thickness Per Coat: 75 microns
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 13m² per litre
- Touch Dry
- 3 Hours
|Larry on 18/10/2017|| |
Question: Hello, does this range of paints fluoresce well under UV blacklights? I'm looking for some paints to produce some murals for a night club. Thanks, Larry
A high-density white base coat to be used under Coo-Var Glocote Fluorescent Paint to ensure the full performance of the product. ADVANTAGES High density formulation Increases visibility Essential for Coo-Var Glocote Fluorescent Paint to function Apply to wood, metal and masonry
An economical, light weight and weather resistant Barrier Tape for cordoning off restricted areas such as building a perimeter for containment and providing added visual warnings to restricted areas where dangerous work may be taking place or where emergency services may be operating.
A range of highly visible fluorescent coloured aerosol marking paints for use on railings, signs, machinery, walls, etc. in maintenance and industrial environments. Increased safety, useable internally and externaly.
Rust-Oleum 2800 Fluorescent Ground Marking Aerosols are quick drying, high quality paint for professional marking purposes at public works (utility works/telecom) building works and industrial sites and adheres to almost any substrate including but not limited to metal, concrete, asphalt, gravel, soil and grass. A 360° valve means the aerosols...
Provides a high visibility surface and is recommended in pedestrian foot traffic areas, or in factories or other workplaces that require a safer, more visible surface. Whether you are applying to wood, concrete or metal, Reflective Hazard Tape provides a safer solution to potentially dangerous foot traffic areas.