Rust-Oleum 2800 Fluorescent Ground Marking Aerosol
Rust-Oleum 2800 Fluorescent Ground Marking Aerosols are quick drying, high quality paint for professional marking purposes at public works (utility works/telecom) building works and industrial sites and adheres to almost any substrate including but not limited to metal, concrete, asphalt, gravel, soil and grass. A 360° valve means the aerosols are sprayable in all directions.
Rust-Oleum 2800 Fluorescent Ground Marking Aerosol is a quick drying quality paint for professional marking purposes at public works (utility works/telecom) building works and industrial sites and adheres to almost any substrate. By means of the 360° valve the aerosol is sprayable in all directions and is based on a fast drying acrylic resin that are aromatic free and based on lead and chromate free pigments.
Rust-Oleum 2800 Fluorescent Ground Marking Aerosol can be used on metal, concrete, asphalt, gravel, soil and grass, etc. They are not water-soluble and should be used in light industrial exposures, normal humidity and interior applications. Rust-Oleum 2800 Fluorescent Ground Marking Aerosols are designed for quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.
Features & Benefits
- Economical, safe and easy to use
- Optimised for ground marking
- Spray through cap for ease of use
- Easier marking
- Quick drying
Remove dirt, grease, oil and all other surface contaminants by appropriate means. The surface must be clean and dry during application.
Directions for Use
Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. It is not possible to clean the spray button in the usual way. Due to the use of the 360° valve this is not necessary.
For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||1.5m² per 500ml Aerosol|
|Touch Dry||5 mins|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close