Mathys Pegagraff-Hydro Cleaner
A gel that can be used to remove graffiti from surfaces that have been protected with Pegagraff Hydro or to clean non-painted substrates that have been contaminated with graffiti, like for instance marble, smooth concrete, metal and non-porous materials.
Mathys Pegagraff-Hydro Cleaner is a gel that can be used to remove graffiti from surfaces that have been protected with Pegagraff Hydro or to clean non-painted substrates that have been contaminated with graffiti, like for instance marble, smooth concrete, metal and non-porous materials.
Mathys Pegagraff-Hydro Cleaner offers active and quick removal of most graffiti on a substrates treated with Pegagraff-Hydro. It is not advised to apply this product on a painted substrate that is not protected by an anti-graffiti product, or on porous materials like for instance bricks, cement rendering, plaster, etc. Pegagraff Hydro Cleaner has no aggressive influence on the substrate, but is dangerous for old unprotected paints.
DIRECTION FOR USE
Application conditions: Apply in a well-ventilated area.
Cleaning tools: Water or thinner
- Apply the cleaner with brush and let it stand for 1 to 3 minutes.
- Remove the graffiti:
a) Wipe away with soft brush.
b) Wipe away with a hard nylon brush (especially in case of structured substrates) = preferred application method.
c) With high pressure.
- If necessary, this treatment should be repeated.
- Rinse thoroughly with water.
- The cleaner may not longer stand than 10 minutes to avoid attack of the Pegagraff Hydro.
- During cleaning, please keep the environmental regulations into account (see Material Safety Data Sheet for more information).
- Wear appropriate safety clothes.
- Mix the product well before application.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close