Coo-Var Luminous Paint Foundation Base
Coo-Var Foundation Base for Luminous Paint is a water based and low odour paint designed for use under Coo-Var Luminous paint. Coo-Var Foundation Base for Luminous Paint is used to provide a white base coat, essential for Coo-Var Luminous Paint to function.
All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Do not apply below 7°C. As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
Direct onto wood and masonry, porous surfaces may require 2 coats of foundation base. Use Coo-Var All Metals Primer on metals.
Do not paint when temperature will be at or below 7 deg C during the painting and drying process.
- Escape routes
- Emergency lighting effect
- Fire doors
- Enclosed areas
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Water / Solvent Based
- For Use On
- Wood, Masonry, Metal,
- Application Method
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Pack Size
- Recommended Thinner/Cleaner
- Solids by Volume
- Touch Dry
- 30 Mins
Be the first to ask a question about this product!