• On sale!

CLEARANCE - Rust-Oleum Epoxyshield Fine Crack Repair

  • 61 x Grey 500ml available - £22.74 now £17.05 each

Rust-Oleum Epoxyshield Fine Crack Repair Mortar is a specially developed, non-shrink, solvent-free, two part epoxy:

  • Liquid crack filler for concrete floors for fine cracks up to 3mm wide
  • Creates a smooth even finish.
  • Dry in 3-4 hours (at 20°C)
  • To recoat after 4 hours (at 20°C)
  • 500 ml for 25 meters (2mm wide, 5mm deep)
  • FREE plastic scraper included

VAT excluded

£20.46 Tax incl.


Rust-Oleum Epoxyshield Fine Crack Repair

Rust-Oleum Epoxyshield Fine Crack Repair Mortar is a quick drying, simple and easy to use, economic, solvent-free and shrink free repair mortar for fine cracks up to 3mm wide. Specially designed for repairing small cracks and holes in concrete floors to create a smooth and even finish, leaving a good sound surface.

Features & Benefits

  • Solvent-free Epoxy (2-part)
  • For repairing fine cracks up to 3mm wide
  • Dry in 3-4 hours (at 20°C)
  • To recoat after 4 hours (at 20°C)
  • 500 ml for 25 meters (2mm wide, 5mm deep)
  • FREE plastic scraper included

Technical Data

  • Solids content in volume: 100%
  • Solids Content in weight: 100%

Drying Times At 20°C/RH 50%

  • Dry to recoat: 3 - 4 hours at 20°C (curing time will be extended by low temperatures)
  • Pot Life: 20 -30 min

A package of 500 ml fills a crack of 2 mm wide and 5 mm deep over approximately 25 linear metres (be aware of the fact that cracks can vary in depth and width). The coverage as mentioned here is therefore only a guideline/estimate.

Application Conditions

Apply the product at a temperatures of minimum 10°C. Mixing: Each packaging of EpoxyShield Fine Crack Repair consists of a can of activator and a separate can of resin. Pour the activator into the can with resin and stir thoroughly with a flat mixing blade. Scrape down the sides and bottom of the tin during mixing to avoid unblended resin/curing agent creating 'soft spots' in the cured product. Application: Pour carefully out of the tin onto and along the line of the crack and level off using the included plastic scraper. Wipe away any excess.


EpoxyShield Fine Crack Repair is intended for surface filling only and will not remedy structural or bonding problems. Cracks caused by structural movement may reappear if movement persists. Cracks in floors where one side has subsided can also be filled, but it will be impossible to achieve a flush finish. To make up differences in floor levels use EpoxyShield Concrete Repar Mortar. The product may be coated with any type of floor paint or high performance coating.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

Product Details

Data sheet

For Use On
Application Method
Rake, Trowel
Standard / Ready Mixed
Single, Two or Three Pack
Pack Size
Min. Application Temperature
Solids by Volume
Shelf Life (from date of manufacture)
1 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
3-4 Hours
UN Number (Activator)
UN 2735
UN Number (Base)
UN 3082

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields