Limited sizes, finishes and colours available. See options below for available quantities.
Teamac Metalcote Plant Enamel, is a tough, flexible enamel paint with an attractive gloss finish and excellent durability. It has good resistance to lubricating, mineral oils, many common industrial chemicals and heat.
Good resistance to oils, chemicals and heat
Ideal for use on all types of machinery including tractors
Teamac Metalcote Plant Enamel is a tough, flexible enamel paint with an attractive gloss finish and excellent durability. It has good resistance to lubricating, mineral oils, many common industrial chemicals and heat. Available in 2,500+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours.
Ideal for use on all types of machinery including tractors.
Available in 2,500+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours
Product Specification
Technical Data
Volume Solids
Approx 35%
VOC Content
Max 550 g/litre
SG
0.91 to 1.08°C
Viscostity
3.0 Poise @ 25°C
Flash Point
Above 32°C (closed cup)
Film Thickness Range And Coverage
Product Data
Dry Film Thickness
Wet Film Thickness
Theoretical Coverage
Maximum
35 to 40 μm
85 μm
12 m2/litre @ 35 microns D.F.T
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50%
Touch Dry:
2 Hours
Dry To Handle:
8 Hours
Dry To Recoat:
8 Hours or overnight
Fully Cured:
3 - 5 Days
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants.
Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.
Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Preceeding Coat
Teamac Metalcote Undercoat
Mixing
Mix well before use.
Application Conditions
As dictated by normal good painting practice.
Care must be taken during application that the temperature is above the dew point to avoid any contamination.
In confined spaces, provide adequate ventilation during application and drying.
See safety data sheet - White - SDS 10719, Black - SDS 10720, Reds and Maroons - SDS 10723, Deutz Silver - SDS 11005, Lead Chrome Yellows (Professional use only) - SDS 10722, All other Lead Chrome free colours - SDS 10721. TAL, TBL and TDL tinting bases - SDS 11071, Tyel and Tred tinting bases - SDS 11072 in attachments section above.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
CLEARANCE - Teamac Metalcote Plant Enamel is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.Suitable for use with Brush, Roller or Spray. Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating. Also suitable for the cleaning of...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...