• Reduced price
  • Rust-Oleum Mathys Metal Cladding Topcoat
  • Rust-Oleum Mathys Metal Cladding Topcoat
  • Rust-Oleum Mathys Metal Cladding Topcoat
  • Rust-Oleum Mathys Metal Cladding Topcoat

Rust-Oleum Mathys Metal Cladding Topcoat - CLEARANCE

  • Semi-Gloss - BS 412 - 10L x 6
  • Semi-Gloss - RAL 7045 - 10L x 1
  • Semi-Gloss - BS 564 - 10L x 1
  • Semi-Gloss - RAL 9010 - 10L x 1

Rust-Oleum Mathys Metal Cladding Topcoat is a long lasting water based, semi-gloss acrylic paint specially designed for use as a finish on exterior metal cladding that has high filling and hiding power and features excellent flow out with high durability and colour and gloss stability.

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Pick a Colour
  • Current colour: RAL7045 - Telegrey 1
Close colour picker
  • RAL7045 - Telegrey 1
  • BS412 - Dark Brown
  • BS564 - Bold Red
  • RAL 9010 - Pure White
£29.69(ex. VAT) Save 75%
£35.63 (inc. VAT)
Product not available
Last Items in Stock and Available for Delivery (See Delivery Options Below)



  • Improved life expectancy (>10 years)
  • Improved aesthetic finish
  • Improved flow, especially with roller and brush
  • Better covering/hiding power with all colours, especially in the darker ones

Rust-Oleum Mathys Metal Cladding Topcoat is a waterborne, semi-gloss acrylic paint specially designed for use as a finish on metal cladding primed with Rust-Oleum Mathys Metal Cladding Primer, Rust-Oleum PVDF Primer or on any metal surface coated with Rust-Oleum Noxyde or Rust-Oleum Noxyde Peganox.

Rust-Oleum Mathys Metal Cladding Topcoat has high filling and hiding power and features excellent flow out with high durability and colour and gloss stability which subsequently means in certain instances can be applied directly to exterior Plastisol wall cladding surfaces (speak to our Technical Department for advice). This provides an extremely cost effective solution to painting cladding when just a simple colour change or rejuvenation coat is required.

Features & Benefits

  • Very decorative satin topcoat
  • Easy to clean and to maintain
  • Excellent flow out for brush, roller or airless spray
  • Good coverage even in one coat
  • Quick drying
  • Long lasting finish and excellent UV-resistance
  • Water-based single pack product - Very low VOC
  • Use on new, bare, blasted or galvanised steel, plastisol®, zinc, copper, aluminium, PVDF/PVF2 (primer may be needed)
  • Tintable to most RAL, NCS and BS colours*

Technical Data

  • Density: 1,3
  • Gloss Level: Satin
  • Corrosion Class: C1/C2 low protection
  • Solids content in volume: 33 %

Drying Times At 20°C/RH 50%

  • Touch dry: 1 hour
  • Dry to handle: 5 hours
  • Dry to recoat: 8 hours
  • Fully cured: 2 days

Theoretical Consumption

8 m²/l

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.


Do not apply in full sun or too hot conditions, to avoid a decreased flow. The product can remain a little sticky if it is used on new Plastisol cladding

*We can mix Rust-Oleum Mathys Metal Cladding Topcoat to virtually any colour with our in-house mixing machine. If you dont see a colour you like just let us know a RAL, British Standard or NCS reference number, or you can send us a physical colour sample and we will match it for you!

Reasons to Paint Cladding;

Over the last 40 years cladding has become the material of choice for many commercial buildings. While the durability of the latest generation of cladding has improved, sooner or later you will face the choice to reclad or refinish your building.

  • Extend the lifetime of the cladding by up to 10 years
  • Much more cost effective than replacement
  • Minimal disturbance of the business processes
  • Protect against atmospheric, chemical and mechanical deterioration
  • Fully utilise the communication role of the building
  • Available in virtually any colour

Guarantees, Warranties and Life Expectancies for Large Cladding Projects

Painting cladding is much more cost effective and less disruptive to the building than replacement. Using our products, it is possible for any competent person to protect and rejuvenate their weathered cladding, improving its life expectancy.

However, often larger cladding projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to the cladding will last for an agreed period of time.

We offer systems that can be used year round to provide up to 15 years protection when applied by an approved contractor to Plastisol HP200, HPS200, PVF2, Powder Coating, Galvanised Steel and more. More than 15 million squares metres have been protected with our systems that are available in virtually any colour including metallic shades protecting against atmospheric, chemical and mechanical deterioration.

We will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.

By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.

If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450.

Product Details

Data sheet

Brush, Roller, Spray
Dry to Handle (at 20°C)
3 Hours
Dry to Recoat (at 20°C)
8 Hours
Fully Cured (at 20°C)
3 Days
8m² per litre
Min. Application Temperature
Solids by Volume
33 %
128 g/l
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
Touch Dry
1 Hour
Recommended Dry Film Thickness
45 µm
Recommended Wet Film Thickness
130 µm
UN Number
Not regulated
Fastest Delivery
Next Working Day

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields
You might also like

Rust-Oleum Mathys Noxyde

We no longer stock this product in 5KG sizes, but have Rust-Oleum Mathys Noxyde - 20KG in stock, ready for immediate dispatch!

In stock

Rust-Oleum Mathys Noxyde Peganox

Rust-Oleum Mathys Noxyde Peganox is a water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application. It forms an anti corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments making it...

Price £49.04 (ex. VAT)
In Stock and Available for Delivery

Rust-Oleum Mathys Metal Cladding Primer

Rust-Oleum Mathys Metal Cladding Primer is a water based primer specially designed for application on weathered metal cladding to provide a perfect base for Rust-Oleum Mathys Metal Cladding Topcoat, also suitable for bare or blasted steel, galvanized steel, zinc and aluminium. Single pack anti-corrosion primer Can be overcoated after just...

Price £148.73 (ex. VAT)
In Stock and Available for Delivery

Rust-Oleum PVDF Primer

Rust-Oleum PVDF Primer is a single pack super adhesion primer for PVDF or PVF2 cladding, galvanised steel, zinc and aluminium. Also ideal primer for difficult metal substrates Tack-free after only 30 minutes Overcoat with NOXYDE for years of protection Coverage Calculator More Information Delivery Info

Price £54.48 (ex. VAT)
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02 (ex. VAT)
In Stock and Available for Delivery