Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Sikagard 63 N is a two part epoxy protective coating with high chemical resistance. Sikagard 63N is an abrasion resistant, universal coating material for use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika EpoCem), steel and aluminium designed for normal to highly aggressive chemical environments.
Sikagard 63 N is a two part epoxy protective coating with high chemical resistance. Sikagard 63N is an abrasion resistant, universal coating material for use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika EpoCem), steel and aluminium designed for normal to highly aggressive chemical environments.
Uses :
Features and Benefits:
For more details please download the product data sheet from the 'DATASHEETS' tab above.
A two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application.
A quick drying, vinyl acrylic, anti-corrosive, primer-finish formulated for direct application to degreased galvanised steelwork without the need for a primer.
High build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers.
Teamac Chlorvar Chlorinated Rubber Paint is a versatile product to provide outstanding protection against chemicals, acids and aqueous solutions on metal, wood and asbestos. Advantages: Ideal for swimming pools Acid resistant Chemical resistant Salt water resistant Interior or exterior
Jotun Tankguard 412 is a two component solvent free polyamine cured epoxy coating that is a general purpose tank lining with good chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
A higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application.
Jotun Tankguard DW is a two component solvent free amine cured epoxy coating that is specially designed for drinking water tanks. It can be used as a primer and finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel and concrete substrates.
Jotun Hardtop AX is a two component chemically curing aliphatic acrylic polyurethane coating that has a high gloss finish with very good gloss retention. It has good chemical resistance and is a high solids product. It should be used as a topcoat in atmospheric environments. Jotun Hardtop AX is recommended for topside, deck and superstructure areas in...
Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.
Sikalastic 844 XT is a two part, elastic, very fast curing modified polyurea spray applied membrane where exposure to high acidic and alkaline chemical concentrations are present, therefore also suitable for the use in closed structures containing biogenic sulphuric acid. Sikalastic 844 XT can only be spray applied with special two part hot spray equipment.
Jotun Penguard Universal is a two component polyamine cured pure epoxy coating that is a fast drying, all year round, high solids, high build product. Jotun Penguard Universal provides excellent corrosion protection as part of a complete coating system and can be used as primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...
Sherwin-Williams Dura-Plate 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over wet steel surfaces. Approved for Network Rail maintenance specifications, it can be used for both immersion and above the waterline service in marine, offshore, construction and...
A 2 pack, solvent free, hygienic floor coating from Rust-Oleum for areas where controlled hygienic conditions are of essential importance and where high durability and abrasion resistance is needed.
Sherwin-Williams Macropoxy C251(formerly Epigrip C251) is a two-pack epoxy phenolic primer finish coating for use as part of a 2 coat system for the internal coating of storage tanks and vessels. Suitable for insulated external carbon or stainless steel surfaces including equipment and pipework.
Sikalastic 8800 is a two part, elastic, 100% solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance. Very fast reactivity and curing time, almost immediate return-to-service time, excellent crack bridging properties, good chemical resistance, excellent abrasion resistance, applicable in temperatures from...
International Interline 975 is a two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals to provide corrosion resistance to a range of products including crude oil, white oils and potable water.
