HMG Thinner 2601
HMG Thinner 2601 is a very fast thinner.For use in recommended HMG systems.More Information Delivery Info
HMG Superthane is a 2K high build, polyurethane coating offering the ultimate levels of chemical resistance, graffiti resistance and superb durability. Superthane has been tested against a wide variety of substances to demonstrate its superb chemical resistance properties.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
2-Pack System Details | |||||
---|---|---|---|---|---|
Base (Part 1) | HMG Superthane | ||||
Hardener (Part 2) | HMG Hardener 9002 |
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
HMG Superthane is a 2K, high build, polyurethane coating offering the ultimate levels of chemical resistance, graffiti resistance and superb durability. Superthane has been tested against a wide variety of substances to demonstrate its superb chemical resistance properties.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9002.
Technical Data | ||||
---|---|---|---|---|
HMG Superthane Clear | HMG Superthane Colours | HMG Superthane Colours (Contains Lead) | ||
Volume Solids: | 45.3% | 59.3% | 56.2% | |
VOC Content: | 0.46 Kg/l | 0.46 Kg/l | 0.46 Kg/l | |
SG: | - | - | - | |
Viscosity: | 220 mPas | 200 mPas | 200 mPas | |
Density: | 1.039 g/cm³ | 1:.252 g/cm³ | 1.233 g/cm³ | |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |
Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | |
Pot Life: | 4 hours @ 20°C | 4 hours @ 20°C | 4 hours @ 20°C | |
Flash Point: | 24°C | 25°C | 24°C |
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Roller: | 40 μm | 60 μm | |
Compliant Spray: | 35 μm | 60 μm | |
Pressure Pot: | 35 μm | 60 μm | |
Airless/Air-Assisted: | 35 μm | 60 μm |
Coverage: 8 square metres per litre @ 40 microns dft.
Drying Times At 20°C | |
---|---|
Touch Dry: | 2 - 4 hours |
Dry To Handle: | 24 hours |
Dry To Recoat: | At any stage, flat down after 24 hours |
Fully Cured: | 5 days |
Technical Data | |||||
---|---|---|---|---|---|
Roller | Compliant Spray | Pressuer Pot | Airless/Air-Assisted | ||
Mixing Ratio: | Base: 2.25 | Base: 2.25 | Base: 2.25 | Base: 2.25 | |
Hardener: 1 | Hardener: 1 | Hardener: 1 | Hardener: 1 | ||
- | Thinner: To viscosity | Thinner: To viscosity | Thinner: To viscosity | ||
Hardener Options: | Hardener 9002 | Hardener 9002 | Hardener 9002 | Hardener 9002 | |
Thinner Options: | Thinner 2601 | Thinner 2601 | Thinner 2601 | Thinner 2601 | |
Thinner 2603 | Thinner 2603 | Thinner 2603 | Thinner 2603 | ||
Viscosity: | 25 - 35 seconds B4 cup | 25 - 35 seconds B4 cup | 25 - 35 seconds B4 cup | 25 - 35 seconds B4 cup | |
Spray Gun Setup: | - | - | - | - | |
Number Of Coats (Guide Only): | 1 dust coat then 2 full coats | 1 dust coat then 2 full coats | 1 dust coat then 2 full coats | 1 dust coat then 2 full coats | |
Flash Off: | 30 minutes | 30 minutes | 30 minutes | 30 minutes |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Information On Basic Physical And Chemical Properties | ||||
---|---|---|---|---|
HMG Superthane Clear | HMG Superthane Colours | HMG Superthane Colours (Contains Lead) | ||
Form: | Liquid | Liquid | Liquid | |
Colour: | White | White | White | |
Odour: | Characteristic | Characteristic | Characteristic | |
Odour Threshold: | Not determined | Not determined | Not determined | |
pH-value 20°C: | Not determined | Not determined | Not determined | |
Melting point/freezing point: | Undetermined | Undetermined | Undetermined | |
Initial boiling point and boiling range: | 137°C | 137°C | 136°C | |
Flash Point: | 24°C | 25°C | 24°C | |
Flammability (solid, gas): | Not applicable | Not applicable | Not applicable | |
Ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | Product is not selfigniting. | |
Decomposition temperature: | Not determined. | Not determined. | Not determined. | |
Auto-ignition temperature: | 315°C | 315°C | 315°C | |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |
Explosion limits: Lower: | 1.1 Vol % | 1.1 Vol % | 1.5 Vol % | |
Explosion limits: Upper: | 10.8 Vol % | 10.8 Vol % | 10.8 Vol % | |
Vapour pressure at 20°C: | 6.7-8.2 hPa | 6.7 hPa | 3.4 hPa | |
Density at 20°C: | 1.039 g/cm³ | 1.252 g/cm³ | 1.233 g/cm³ | |
Relative density: | Not determined | Not determined | Not determined | |
Vapour density: | Not determined | Not determined | Not determined | |
Evaporation rate: | Not determined | Not determined | Not determined | |
Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | |
Partition coefficient: n-octanol/water: | Not determined | Not determined | Not determined | |
Viscosity: Dynamic at 20°C: | 220 mPas | 200 mPas | 200 mPas | |
Viscosity: Kinematic: | Not determined | Not determined | Not determined | |
Solvent content: Organic solvents: | 54.7% | 40.1% | 43.8% | |
Solids content: | 45.3% | 59.3% | 56.2% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG Superthane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2601 is a very fast thinner.For use in recommended HMG systems.More Information Delivery Info
HMG Thinner 2603 is a medium slow thinner.For use with compatible HMG systems.More Information Delivery Info
HMG Hardener 9002 is a 2k isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG SuperthaneHMG SupersheenThinner (Part 2) HMG Hardener 9002Part two of a two-pack systemProfessional...