Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

HMG Supersheen is a 2K Polyurethane coating offering ultimate levels of: weathering, colour retention, solvent resistance, abrasion resistance, wide ranging chemical resistance.

Please note this product is suppled as a two-pack system consisting of 1 x 3L Supersheen Base and 1 x 1L HMG Hardener 9002.

Click To Jump To Section:

• Features & Benefits
• Product Specification
• Film Thickness Range And Coverage
• Drying Times
• Surface Preparation
• Application Methods
• Product Notes
• Health & Safety

Features & Benefits

• Part two of a two-pack system
• Ease of use
• Good long term durability
• Anti-graffiti
• Available in 3,500 colours from RAL, NCS, and British Standard

Supersheen offers the highest quality finish on ferrous and non­ferrous metals, wood, concrete, asbestos, fibreglass etc, and finds use in applications such as ship superstructures, bridges, aircraft, high quality structural steelwork, food storage warehouses, abattoirs, hospital, all structures in chemical or abrasive environments, railway rolling stock, road tankers, high quality commercial vehicles, building facings.  Protection of bright metal surfaces can also be carried out using clear supersheen.

Supersheen is finding increased popularity in refinishing in all the previously mentioned fields.  In most cases all that is necessary on previously painted surfaces, is to flat down and apply either Uniblok Sealer or HMG Washfiller and then apply the Supersheen system in the normal recommended manner. Supersheen is a fairly slow drying system, being dust free in 2 ­ 4 hours; firm dry in 24 hours; fully cured in 5 days @ 20ºC.

It can be subjected to normal exposure to the atmosphere after reaching the firm dry stage, i.e. 24 hours after the application of the final coat, but must be allowed at least 5 days to cure when subjected to chemical or harsh abrasive conditions.

Product Specification

Film Thickness Range And Coverage

Coverage: 12.5 square metres per litre at 40 microns dft (Theoretical)

• HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
• These values are a guide only and are not to be used as specifications.
• Film thickness will vary depending on actual use and specification.
• Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.

Drying Times

Surface Preparation

• Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
• Read and follow the Safety Data Sheet, Product Data Sheet and label instructions.
• Stir all paints thoroughly before use.
• Always use the same batch number on the same job.
• Check colour & sheen.
• Filter the product immediately before use.
• Reduce emissions and maintain quality by replacing tin lid after use.

Application Methods

For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]

Product Notes

Health & Safety

• Refer to the safety data sheet in the attachments section above and tin label prior to use.
• Ready for use product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.

Click to go back to the top of the page