Jotun Balloxy HB Light is a surface tolerant, high solids, high build epoxy mastic coating for water ballast tanks. It is specially designed for areas where optimum surface preparation is not possible or desired and provides long lasting protection in environments with high corrosivity. Jotun Balloxy HB Light can be used as primer, mid coat or...
Jotun Tankguard HB Classic
Tankguard HB Classic is a pure epoxy tank coating suitable for both transportation and storage of a wide range of chemicals including crude oil, aromatic and aliphatic solvents and others. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Jotun Tankguard HB Classic is a two component polyamine cured epoxy coating. It has good chemical resistance. Can be used as primer,mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Designed as an internal tank coating for chemical tanks. This coating has good resistance to a wide range of products. Refer to Marine Product Resistance List. Can be used as a coating for grey water, drilling mud, brine and crude oil tanks.
Recommended as an internal lining for offshore, onshore and buried tanks and pipes. Refer to Protective Product Resistance List.
Features & Benefits
- High resistance to petroleum products, hydrocarbons, alkalies, chemicals and intermediates
- Good over-coating and cure times
- Smooth surface
Product to be combined with
Tankguard HB Classic can be used in a system with Tankguard Holding Primer.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Spray
- 4.1 - 8.1m² per litre
- Touch Dry
- 3 hours
Be the first to ask a question about this product!
A two component novolac epoxy coating is a specially designed tank lining with excellent chemical resistance. It can be used as primer, mid coat and finish coat in atmospheric and immersed environments. Image already added Coverage Calculator
PPG SigmaPrime 200 is a universal epoxy anticorrosive primer based upon pure epoxy technology, a primer system that is suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargoholds, with excellent anticorrosive properties and water resistance. Surface tolerant primer, with good chemical resistance Good...
Jotun Tankguard Zinc is a two component moisture cured inorganic zinc ethyl silicate coating that is a specially designed tank coating and lining with excellent cargo resistance. To be used as a single coat system only, in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates. Coverage Calculator
Sikalastic 841 ST is a liquid applied, pure polyurea membrane. Itis a two part, elastic, 100% solids, very fast curing pure polyurea liquid applied membrane with very good chemical resistance. Sikalastic 841 ST shall not be used in closed structures containing biogenic sulphuric acid. Sikalastic 841 ST can only be spray applied with special...
International Interline 955 can be applied in a wide range of climatic conditions, including material temperatures up to 35°C (95°F). However, at material temperatures greater than 25°C (77°F) the use of International Interline 955 Retarder Solution is required in order to maintain the working pot life, allowing normal airless spray methods to be employed.
International Interline 399 is a high performance, highly crosslinked two component epoxy novolac tank lining, with excellent heat and solvent resistance suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C (266°F). Coverage Calculator
Nova-Plate 325 is an amine cured, glass and ceramic filled tank lining that utilises advanced epoxy novolac technology. It is engineered to protect cargo and steel tank interiors from chemicals stored at high temperatures and high pressures. It provides quick return to service, high film build and can be used in applications where...
PPG SigmaGuard 720, a two-component, reinforced high solids tank coating, based upon polyamine adduct cured pure epoxy technology. The coating has recognized corrosion control (Lloyd's Register) and short curing periods, . Tank coating with good chemical resistance against a wide range of chemicals Short curing periods and easy to clean...
Sherwin-Williams Fast Clad ER is a solvent-free, epoxy tank lining that offers superior ﬂexibility, excellent edge retention, film forming and high build properties. Fast Clad ER enables ultra fast return to service in as little as 24 hours.
A cross-linked penetrating metal primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and accepts a variety of topcoats. Top Features Universal primer and tie-coat Cures down to 35°F (2°C) Low stress, highly flexible film Extremely high solids Contains corrosion inhibitors
Sikagard 62 is a 2-pack solvent-free high build coating material based on epoxy resin with DWI approval and good chemical resistance. Produces an abrasion-resistant coating designed for normal to moderately aggressive chemical environments for use on concrete, stone, cementitious mortars and renderings (not polymer- modified), epoxy cements...
Jotun Tankguard Plus is a two component polyamine cured novolac epoxy coating that has high resistance to most sour crude oils and a wide range of chemicals and solvents. It has outstanding chemical resistance to crude oil at temperatures up to 160 °C. Jotun Tankguard Plus can be used as a primer, mid coat or finish coat in atmospheric and...
An extremely durable and chemically resistant cladding utilizes a multi-step curing process that incorporates chemically-fused glass flake reinforcing in a highly cross-linked polyester matrix. Top Features Outstanding marine exposure resistance Excellent resistance to both organic and mineral acids Outstanding long-term protection
PPG Sigmaline 2000 is a two-component, solvent-free, amine-cured phenolic epoxy coating, a one-coat system for direct application to metal for pipe externals that is suitable for bell holing jobs. Resistant to well-designed cathodic protection Glossy and smooth appearance Can be applied by heavy-duty, twin-feed, hot, airless spray...
An extremely abrasion and chemical resistant polyester coating with multiple layers of glass flakes incorporated in a highly cross-linked polyester matrix. Top Features Ideal for long-term protection in marine environments. Used as a tank lining and for areas exposed to many acids. Recommended for protection of steel.