Jotun Tankguard SF is a two component solvent free amine cured novolac epoxy coating that is a specially designed tank lining with very good chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
High resistance to petroleum products, hydrocarbons, alkalies, chemicals and intermediate
Sour crude oil resistant up to 140°C
Solvent free novolac with a wide DFT range (150-500 µm)
Jotun Tankguard SF is a two component solvent free amine cured novolac epoxy coating that is a specially designed tank lining with very good chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Jotun Tankguard SF is designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. Refer to Protective Product Resistance List.
Certificates and approvals may be available on request.
Features & Benefits
High resistance to petroleum products, hydrocarbons, alkalies, chemicals and intermediate
Sour crude oil resistant up to 140°C
Solvent free novolac with a wide DFT range (150-500 µm)
Wide film thickness range With the versatility in film thickness you can easily apply in two-coat systems – typically 2 x 200 µm or one-coat systems – like 1 x 300 µm
Application Tankguard SF is easy to apply with standard airless spray – unlike many other solvent free epoxies. Other benefits are that there is no solvent entrapment and no shrinkage, and it has good pit filling capabilities.
BUYER NOTICE: Due to the complexities and risks within tank coatings, Jotun do not support the purchase of their Tankguard range through dealer/distributor channels. Jotun are happy to support with advice and documentation required for these types of coating projects but as they are removed from the end user the ability to control all risks involved with a coating project for a tank is limited. For these reasons, Jotun will only ensure the product quality within the can when Tankguard products are purchased via a distributor such as ourselves.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Is Tankguard SF designed for coating treated water tanks from inside? What is the best Food Grade for painting treated water tanks from inside?
Answer from Rawlins’ Technical Team:
Jotun Tankguard SF conforms to requirements for FDA approval and may be used for contact with all types of food. Of course, when applying as a tank lining the recommendations on the Technical Data Sheet and Application Guide must be followed.
Jotun Tankguard SF is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Jotun Thinner No. 17 is a paint thinner designed to improve the flow of a range of Jotun epoxy products. It can also be used as cleaner of pumps and tools after and before painting.
Jotun Thinner No. 17 is specially suitable as a thinner for epoxies and similar type products except Tankguard series.
More Information Delivery Info