- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
OPEN AS USUAL DURING LOCKDOWN #3
Jotun Tankguard DW
JOT1092
Jotun Tankguard DW is a two component solvent free amine cured epoxy coating that is specially designed for drinking water tanks. It can be used as a primer and finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel and concrete substrates.
- Potable water/drinking water approvals – BS 6920
- Easy to apply with airless spray
- Smooth surface
- Excellent application properties
- Designed for use in drinking water tanks
- Benzyl Alcohol free – no risk of taste or smell
- Minimum 10°C substrate temperature
- Approved for water up to 60°C
**Available for delivery - see Delivery Options below**
Description
Jotun Tankguard DW is a two component solvent free amine cured epoxy coating that is specially designed for drinking water tanks. It can be used as a primer and finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel and concrete substrates.
Jotun Tankguard DW is to be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage.
Approvals and certificates
- Approved to BS 6920-1:2000 for contact with potable water.
- Approved by the Norwegian Institute of Public Health for use in contact with potable water.
- In compliance with Federal Drug Authority, USA, FDA Title 21, Part 175.300, approved for exposure to dry foods.
- Meets the requirements of ANSI/AWWA standard C210-07. Suitabilty for water pipelines.
Additional certificates and approvals may be available on request.
Features & Benefits
- Potable water/drinking water approvals – BS 6920
- Easy to apply with airless spray
- Smooth surface
Tankguard DW is our recommended coating for potable water tanks when performance, application properties and certificates are important with the following benefits:
- Excellent application properties
- Designed for use in drinking water tanks
- Benzyl Alcohol free – no risk of taste or smell
- Minimum 10°C substrate temperature
- Approved for water up to 60°C
Certificates and approvals
Approved for contact with drinking water according to BS 6920 and by the Norwegian Institute for Public Health
BUYER NOTICE: Due to the complexities and risks within tank coatings, Jotun do not support the purchase of their Tankguard range through dealer/distributor channels. Jotun are happy to support with advice and documentation required for these types of coating projects but as they are removed from the end user the ability to control all risks involved with a coating project for a tank is limited. For these reasons, Jotun will only ensure the product quality within the can when Tankguard products are purchased via a distributor such as ourselves.
Product Details
JOT1092
Data sheet
- For Use On
- Carbon Steel, Stainless Steel, Concrete
- Application Method
- Brush, Spray
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Approved to BS 6920-1:2000 for contact with potable wate
- Pack Size
- 15L
- Application
- Brush, Spray
- Coverage
- 2.5 to 6.7m² per litre
- Density
- 1.4 kg/l
- Solids by Volume
- 100%
- VOC
- 2 g/l
- Shelf Life (from date of manufacture)
- 12 months
- Touch Dry
- 10 hours
- Recommended Dry Film Thickness
- 150 - 400 μm
- Recommended Wet Film Thickness
- 150 - 400 μm
- UN Number (Activator)
- UN3066
- UN Number (Base)
- UN3082
- Pot Life
- 30 minutes at 23°C
 vince coleman on 2019-09-13 08:52:35 | Question:
Is this suitable for use in a wine vat? mild acidic environment |
Answer:
This should be OK as long as the substrate is suitable and preparation and application are carried out in accordance with the manufacturers instructions. | |
