Description
Jotun Tankguard Special Ultra is a two component polyamine cured novolac epoxy coating specially designed as a tank coating with excellent chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel and stainless steel substrates and can be applied down to +5°C surface temperature.
Jotun Tankguard Special Ultra is specially designed as an internal tank coating for chemical tanks. This coating has excellent resistance to a wide range of products with very little chemical absorption making it highly suitable for frequent changes of cargo. Refer to Marine Product Resistance List.
Approvals and certificates
- Approved to UK Defence Standard 80-97 isue 5, annex G for resistance to Avtur F-34 FSI aviation fuel
- In compliance with Federal Drug Authority, USA, FDA Title 21, Part 175.300, approved for exposure to dry foods
Additional certificates and approvals may be available on request.
Features & Benefits
- Excellent chemical resistance – including methanol
- Most versatile tank coating for chemical carriers
- Smooth, easy to clean surface
Versatile novolac epoxy tank coating
Tankguard Special Ultra offers a tough and durable finish. It is a top of the range tank coating with the most extensive resistance list. Being a novolac epoxy, it has a higher degree of cross-linking and is therefore more flexible in carrying products at elevated temperatures. Tankguard Special Ultra gives good over-coating and cure times with a smooth surface after application. This again results in a tank surface which is easy to clean between cargos.
Product to be combined with
Tankguard TU is a two-component novolac epoxy coating with high resistance to a wide range of chemicals and solvents. It is designed for brush application and is the perfect solution for repair of small damages and stripe coating in combination with Tankguard Special Ultra.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
Data sheet
- Typical Coverage (per coat)
- 7m² per litre
- Touch Dry
- 4 hours
- Application
- Brush, Spray
Attachments
Download
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
