- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
OPEN FOR BUSINESS AS USUAL DURING LOCKDOWN #2
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Jotun Balloxy HB Light WG
0KLLBGFVA 0KLLGNFVA
Jotun Balloxy HB Light WG is a `Wintergrade` version of Jotamastic 90 to aid application in lower temperatures and to provide faster drying and curing times. Jotun Balloxy HB Light WG is a surface tolerant, high solids, high build epoxy mastic coating for water ballast tanks. It is specially designed for areas where optimum surface preparation is not possible.
- IMO PSPC for WBT approved
- Visual DFT control
- Visual mixing control
- Surface tolerant - only water jetting and power tool needed
- For repair and maintenance
**Available for delivery - see Delivery Options below**
Description
BUYER NOTICE: Due to the complexities and risks within tank coatings, Jotun do not support the purchase of their Balloxy range through dealer/distributor channels. Jotun are happy to support with advice and documentation required for these types of coating projects but as they are removed from the end user the ability to control all risks involved with a coating project for a tank is limited. For these reasons, Jotun will only ensure the product quality within the can when Balloxy products are purchased via a distributor such as ourselves.
Jotun Balloxy HB Light WG is a 'Wintergrade' version of Jotamastic 90 to aid application in lower temperatures and to provide faster drying and curing times. Jotun Balloxy HB Light WG is a surface tolerant, high solids, high build epoxy mastic coating for water ballast tanks. It is specially designed for areas where optimum surface preparation is not possible or desired and provides long lasting protection in environments with high corrosivity. Jotun Balloxy HB Light WG can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.
Features & Benefits
- IMO PSPC for WBT approved
- Visual DFT control
- Visual mixing control
- Surface tolerant - only water jetting and power tool needed
- For repair and maintenance
IMO PSPC Approved
Type approved for use at new building as well as for repair situations for both medium and long term protection. Type approval certificates from several class societies – please ask for details.
Compatible with ballast water treatment systems (BWTS)
When the approved BWTS systems are operated correctly and the active species’ concentration is not above 10 ppm, we see no detrimental effect on correctly applied and cured Jotun Balloxy HB Light WG.
Visual DFT control
In order to obtain correct dry film thickness (DFT), Jotun Balloxy HB Light has built-in a visual DFT – you will obtain proper hiding of the substrate when the minimum wet film thickness is applied.
Visual mixing control
Two components with different colours make it easy to see when you have obtained proper mixing.
Product Details
0KLLBGFVA 0KLLGNFVA
Data sheet
- For Use On
- Steel, Aluminium
- Application Method
- Brush, Spray
- Sheen
- Semi Gloss
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82)
- Pack Size
- 20L
- Application
- Brush, Spray
- Coverage
- 2.4 to 5.7m² per litre
- Recommended Thinner/Cleaner
- Jotun Thinner No. 17
- Density
- 1.4 kg/l
- Solids by Volume
- 71 ± 2 %
- VOC
- 272 g/l
- Shelf Life (from date of manufacture)
- 48 months
- Touch Dry
- 2.5 Hours
- Recommended Dry Film Thickness
- 125 - 300 μm
- Recommended Wet Film Thickness
- 175 - 420 μm
- UN Number
- UN1263
- Pot Life
- 1.5 hours at 23°C
Be the first to ask a question about this product!
