Jotun Balloxy HB Lumi
Jotun Balloxy HB Lumi is a version of Balloxy HB Light – containing luminous pigments. This surface tolerant, high solids, high build paint for water ballast tank is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.
Jotun Balloxy HB Lumi is a version of Balloxy HB Light – containing luminous pigments. This surface tolerant, high solids, high build paint for water ballast tank is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.
Features & Benefits
- IMO PSPC for WBT approved
- Visual DFT control
- Visual mixing control
- Surface tolerant – only water jetting and power tool needed
- For repair and maintenance
IMO PSPC Approved
Type approved for use at new building as well as for repair situations for both medium and long term protection. Type approval certificates from several class societies – please ask for details.
Compatible with ballast water treatment systems (BWTS)
When the approved BWTS systems are operated correctly and the active species’ concentration is not above 10 ppm, we see no detrimental effect on correctly applied and cured Jotun Balloxy HB Lumi.
Visual DFT control
In order to obtain correct dry film thickness (DFT), Balloxy HB Lumi has built-in a visual DFT – you will obtain proper hiding of the substrate when the minimum wet film thickness is applied.
Visual mixing control
Two components with different colours make it easy to see when you have obtained proper mixing.
Visual inspection – Luminescent paint
Jotun Balloxy HB Lumi aids inspection with the help of a UV lamp.
First coat inspection:
- Areas of under thickness show up as ‘black’ spots
- Areas of high dry film thickness appear much brighter than low thickness areas
Second coat inspection:
- Holidays will show the first coat only, and any other defects will be seen
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close