International Interline 925
  • International Interline 925

International Interline 925

THA125

International Interline 925 is a two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals.

  • Provides corrosion resistance to a range of products including crude oil, white oils and potable water

Colour
Size
£495.25
VAT excluded

£594.30 Tax incl.
Quantity

Description

International Interline 925 is a two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals to provide corrosion resistance to a range of products including crude oil, white oils and potable water.

International Interline 925 is suitable for application over concrete for lining and secondary containment purposes. International Interline 925 is Certified to NSF/ANSI 61, NSF Certification is for tanks greater than 1000 gallons (3785 litres).

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
THA125

Data sheet

Manufacturer
International
Interior / Exterior Use
Interior
For Use On
Steel
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Mixing Ratio
3 part(s) : 1 part(s) by volume
Application
Brush, Roller, Spray
Coverage
2.5m² per litre
Solids by Volume
100%
VOC
1.04 lb/gal (125 g/lt) EPA Method 24
Shelf Life (Once Opened)
18 months minimum at 25°C (77°F). Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition.
Touch Dry
8 Hours
Touch Dry
8 hours at 25°C
Recommended Dry Film Thickness
300-600 microns (12-24 mils)
Recommended Wet Film Thickness
300-600 microns (12-24 mils)
UN Number (Activator)
UN3066
UN Number (Base)
UN3082
Touch Dry (at 10°C)
15 hours
Hard Dry
36 hours at 10°C - 18 hours at 25°C
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send