International Interline 975
  • International Interline 975

International Interline 975

THA972

International Interline 975 is a two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals to provide corrosion resistance to a range of products including crude oil, white oils and potable water.

  • Solvent free, high build, amine cured epoxy tank lining
  • Certified to BS6920:2000 standard for the storage of drinking water
  • Hard, glossy coating which provides a long-life, easy clean, low maintenance surface for safe, taint-free potable water storage
  • Can be used to provide resistance to a range of products including potable water crude oil, and white oils
  • Suitable for application as a single coat system, using standard airless spray equipment, economical to apply
  • Recoatable up to 28 days for improved scheduling of contracts

Colour
Size
£458.16
VAT excluded

£549.79 Tax incl.
Quantity

Description

International Interline 975 is a two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals to provide corrosion resistance to a range of products including crude oil, white oils and potable water. International Interline 975 is suitable for application over concrete for lining and secondary containment purposes.

Features & Benefits:

  • Solvent free, high build, amine cured epoxy tank lining
  • Certified to BS6920:2000 standard for the storage of drinking water
  • Hard, glossy coating which provides a long-life, easy clean, low maintenance surface for safe, taint-free potable water storage
  • Can be used to provide resistance to a range of products including potable water crude oil, and white oils
  • 100% solids, zero VOC formulation which eliminates solvent emission, explosion risk and fire hazard
  • Suitable for application as a single coat system, using standard airless spray equipment, economical to apply
  • Recoatable up to 28 days for improved scheduling of contracts

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
THA972

Data sheet

Manufacturer
International
For Use On
Steel, Concrete
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Product Certifications
Certified to BS6920:2000 standard for the storage of drinking water
Pack Size
16L
Mixing Ratio
2 part(s) : 1 part(s) by volume
Mixing Ratio
2.2 part(s) : 1 part(s) by volume
Application
Brush, Roller, Spray
Coverage
2.5m² per litre
Recommended Thinner/Cleaner
International GTA853 or International GTA415
Solids by Volume
100%
Solids by Volume
100%
VOC
0.58 lb/gal
VOC
0.00 lb/gal
Shelf Life (from date of manufacture)
12 months minimum at 25°C (77°F). Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition
Shelf Life (from date of manufacture)
18 months minimum at 25°C (77°F). Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition. International Paint recommends storage above 10°C (50°F) at all times to ensure stability of the product
Touch Dry
7 hours at 25°C
Touch Dry
7 Hours
Touch Dry
10°C: 10 hours - 15°C: 9 hours - 25°C: 6 hours - 40°C: 2 hours
UN Number (Activator)
UN3066
UN Number (Base)
UN3082
Touch Dry (at 10°C)
15 hours
Pot Life
10°C: 1 hour - 15°C: 50 minutes - 25°C: 30 minutes - 40°C: 15 minutes
Pot Life
1 hour at 25°C
Fully Cured
7 days at 25°C
Hard Dry
36 hours at 10°C - 16 hours at 25°C
Hard Dry
10°C: 36 hours - 15°C: 20 hours - 25°C: 12 hours - 40°C: 5 hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send