Jotun Tankguard Holding Primer
  • Jotun Tankguard Holding Primer

Jotun Tankguard Holding Primer

JOT1094

Jotun Tankguard Holding Primer is a two component polyamine cured phenolic/novolac epoxy coating. Designed as a holding primer or primer in a complete tank coating system.

  • It has excellent chemical resistance
  • Can be used as primer in atmospheric and immersed environments
  • Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates

Colour
Size
£187.11
VAT excluded

£224.53 Tax incl.
Quantity

Description

Jotun Tankguard Holding Primer is a two component polyamine cured phenolic/novolac epoxy coating. Designed as a holding primer or primer in a complete tank coating system. It has excellent chemical resistance. Can be used as primer in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.

Jotun Tankguard Holding Primer is compatible with the following coatings:

  • Tankguard Plus
  • Tankguard Storage
  • Tankguard SF
  • Tankguard HB
  • Tankguard HB Classic
  • Tankguard NCV
  • Chemtech GM
  • Chemflake Special
  • Chemflake Classic

Typical Use

Protective: Specially designed as a part of an internal tank coating system for chemical tanks offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. This product is compatible with a specific range of coatings.

Approvals and certificates

  • Approved to UK Defence Standard 80-97 issue 5, annex B for resistance to Avtur F-34 FSII aviation fuel

Additional certificates and approvals may be available on request.

 

BUYER NOTICE: Due to the complexities and risks within tank coatings, Jotun do not support the purchase of their Tankguard range through dealer/distributor channels. Jotun are happy to support with advice and documentation required for these types of coating projects but as they are removed from the end user the ability to control all risks involved with a coating project for a tank is limited. For these reasons, Jotun will only ensure the product quality within the can when Tankguard products are purchased via a distributor such as ourselves.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
JOT1094

Data sheet

Manufacturer
Jotun
For Use On
Steel, Concrete
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
20L
Application
Brush, Roller, Spray
Coverage
7.1 - 21.5m² per litre
Recommended Thinner/Cleaner
Jotun Thinner No. 23
Density
1.3 kg/l
Solids by Volume
43 ± 2 %
VOC
527 g/l
Shelf Life (from date of manufacture)
24 months
Touch Dry
4 Hours
Recommended Dry Film Thickness
20 - 60 μm
Recommended Wet Film Thickness
50 - 140 μm
UN Number (Activator)
UN3470
UN Number (Base)
UN1263
Pot Life
20 minutes at 23°C
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send