Please note: Solignum Architectural (Solvent Based) is now available in an additonal colour: Tor Opaque Woodstain - Russet. This has been formulated to match the colour of the now discontinued Tor Opaque Woodstain.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Tor Opaque Woodstain for rough sawn timber such as fencing, sheds etc. Available in a russett colour with a satin finish, the woodstain penetrates into rough timber and can be applied by brush, roller, or spray.
Features & Benefits
Woodstain, for rough sawn timber
Ideal for colouring and protecting fencing, sheds, gates, etc
Good coverage, up to 10 square metres per litre
Note that coverage will vary considerably depending on the type of timber, its moisture content and any preservative pre-treatment retention.
Apply by brush, roller or spray
Little to no surface preparation required
Touch dry in 1 hour
Allow to dry for 24 hours before overcoating
Product Information
A microporous low-pigmentation modified alkyd resin containing white spirit.
Product reference
AK777
Volume solids
51%
Typical thickness
Penetrates
Theoretical coverage
10 square metres per litre (see limitations further below)
Practical coverage
Reduce by up to 25%
VOC content
EU limit value for this product (cat A/e): 400 g/l . This product contains max 400 g/l VOC
Surface Preparation
Ensure surfaces are clean, dry and free of contamination.
Tor Opaque Woodstain is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application. More Information Delivery Info