HMG Cellulose Hi Seal Sanding Sealer
HMG Cellulose Hi Seal Sanding Sealer is a medium solids cellulose based basecoat/sealer for use on wood and veneer.Fast drying Easily sandedMore Information Delivery Info
£59.30 (incl. VAT)
£49.42 (ex. VAT)
HMG Industrial Cellulose is a fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
HMG Industrial Cellulose is a fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates.
HMG industrial cellulose gives high build, high gloss and great simplicity of use. These properties combined offer the user a quick and economical way to achieve a high standard of work.
Technical Data | |
---|---|
Volume Solids: | 30.7% |
VOC Content: | 0.66Kg/L |
SG: | - |
Viscosity (kinematic @ 20°C): | 79 s (DIN 53211/4) |
Density: | 0.967 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | -4°C |
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Aerosol: | 15 μm | 50 μm | |
Compliant Spray: | 15 μm | 50 μm | |
Pressure Pot: | 15 μm | 50 μm |
Coverage: 10 square metres per litre @ 50 microns (Theoretical)
Drying Times At 20°C | |
---|---|
Touch Dry: | 10 minutes |
Dry To Recoat: | At any stage after flashoff. |
Fully Cured: | 1 hour |
NB: If Industrial cellulose is to be used over aluminium and alloys an HMG etch primer or washfiller must be used. For full advice on priming difficult substrates, please contact: Rawlins Team on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Technical Data | |||||
---|---|---|---|---|---|
Aerosol | Compliant Spray Gun | Pressure Pot | |||
Mixing Ratio: | Ready for use | Base: 1 | Base: 1 | ||
- | Thinner: 1 | Thinner: 1 | |||
Thinner Options: | - | Thinner 2641 | Thinner 2641 | ||
- | Thinner 2642 | Thinner 2642 | |||
Viscosity: | Ready for use | 25 seconds B4 cup | 25 seconds B4 cup | ||
Spray Gun Setup: | N/A | 1.4 - 1.8 | 1.2 - 1.4 | ||
Number Of Coats (Guide Only): | 2 full coats | 2 full coats | 2 full coats | ||
Flash Off: | 10 minutes | 10 minutes | 10 minutes |
Information on basic physical and chemical properties | |
---|---|
Form: | Liquid |
Colour: | According to product specification |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Change in Condition | |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 36°C |
Flash Point: | -4°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 315°C |
Decomposition temperature: | Not determined. |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
Explosion limits: Lower: | 1.1 Vol % |
Explosion limits: Upper: | 7.5 Vol % |
Vapour pressure at 20°C: | 11.2 hPa |
Density at 20°C: | 0.967 g/cm³ |
Relative density: | Not determined |
Vapour density: | Not determined |
Evaporation rate: | Not determined |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | Not determined |
Viscosity: Kinematic: | 79 s (DIN 53211/4) |
Solvent content: Organic solvents: | 73.2% |
Solids content: | 30.7% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG Industrial Cellulose is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Cellulose Hi Seal Sanding Sealer is a medium solids cellulose based basecoat/sealer for use on wood and veneer.Fast drying Easily sandedMore Information Delivery Info
£59.30 (incl. VAT)
£49.42 (ex. VAT)
HMG Pre Cat Standard Sealer is a 1K basecoat/sealer for use on wood and veneer.Fast drying. Contains no sterate. Excellent and easy sandability. Gives excellent and tenacious adhesion to wood with minimal preparation. Minimises sinkage of topcoats. Enables fast throughput of work to a high standard.More Information Delivery Info...
£208.67 (incl. VAT)
£173.89 (ex. VAT)
HMG Thinner 2641 is a medium fast thinner.Designed for use with cellulose based systems.More Information Delivery Info
£14.05 (incl. VAT)
£11.71 (ex. VAT)
HMG Thinner 2642 is a medium slow thinner which can be used with compatible HMG systems.For use with cellulose based systems.More Information Delivery Info
£49.86 (incl. VAT)
£41.55 (ex. VAT)