HMG Waterborne LMP Colours

    TOPLMP
    HMG4398

    HMG Waterborne LMP Colours is a high quality 1K water-based acrylic based paint range offering excellent drying characteristics.

    • Excellent adhesion to a wide variety of substrates and ease of brushability.
    • Developed as an alternative to solvent based alkyd synthetic enamels for situations where its particular properties are preferred.
    • Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours

    Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish
    £32.29(ex. VAT)
    £38.75 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    HMG Waterborne LMP Colours is a high quality 1K water-based acrylic based paint range offering excellent drying characteristics. Available in 400+ RAL and British Standard colours.



    Click To Jump To Section:




    Features & Benefits


    • Excellent adhesion to a wide variety of substrates and ease of brushability.
    • Developed as an alternative to solvent based alkyd synthetic enamels for situations where its particular properties are preferred.
    • Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
    • Not suitable for exterior use.



    Product Specification


    Technical Data
    Volume Solids:48.7%
    VOC Content:0.11 Kg/l
    SG:-
    Viscosity:1500 mPas
    Density:1.227 g/cm³
    Storage Conditions:Store between 5°C - 25°C. When not in use, cans must be kept sealed.
    Shelf Life:12 months from delivery date in original sealed containers.
    Flash Point:101°C



    Film Thickness Range And Coverage


    Product Data
     Dry Film ThicknessWet Film Thickness
    Brush:30 μm80 μm
    Roller:30 μm80 μm
    Compliant Spray:30 μm80 μm



    Coverage: 12 square metres per litre at 30 microns dft (theoretical)

    • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
    • These values are a guide only and are not to be used as specifications.
    • Film thickness will vary depending on actual use and specification.
    • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



    Drying Times


    Drying Times At 20°C
    Touch Dry:30 minutes
    Dry To Recoat:16 hours minimum - 14 days maximum
    Fully Cured:24 hours



    Surface Preparation


    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
    • Read and follow the safety data sheet, product data sheet and label instructions.
    • Stir all paints thoroughly before use.
    • Always use the same batch number on the same job.
    • Check colour & sheen.
    • Filter the product immediately before use.
    • Reduce emissions and maintain quality by replacing tin lid after use.



    Application Methods


    Technical Data
    BrushRollerCompliant Spray
    Mixing Ratio:Ready for useReady for useBase: 5 ltr
    --Thinner: >10%
    Thinner Options:--Water
    ---
    Viscosity:As suppliedAs suppliedAs supplied
    Spray Gun Setup:---
    Number Of Coats (Guide Only):1 - 2 coats1 - 2 coats1 - 2 coats
    Flash Off:---



    For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



    Product Notes


    Information on basic physical and chemical properties
    Form:Liquid
    Colour:According to product specification
    Odour:Characteristic
    Odour Threshold:Not determined
    pH-value 20°C:8
    Change in Condition
    Melting point/freezing point:Undetermined
    Initial boiling point and boiling range:100°C
    Flash Point:101°C
    Flammability (solid, gas):Not applicable
    Ignition temperature:370°C
    Decomposition temperature:Not determined.
    Auto-ignition temperature:Product is not selfigniting
    Explosive properties:"Product is not explosive. However, formation of explosive air vapour mixtures are possible."
    Explosion limits: Lower:2.6 Vol %
    Explosion limits: Upper:12.6 Vol %
    Vapour pressure at 20°C:23 hPa
    Density at 20°C:1.227 g/cm³
    Relative density:Not determined
    Vapour density:Not determined
    Evaporation rate:Not determined
    Solubility in / Miscibility with water:NOT MISCIBLE
    Partition coefficient: n-octanol/water:Not determined
    Viscosity: Dynamic at 20°C:1500 mPas
    Viscosity: Kinematic:Not determined
    Solvent content: Organic solvents:13.5%
    Solids content:48.7%



    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use.
    • Suitable respiratory equipment should be worn when spraying.

    Click to go back to the top of the page

    Product Details
    4398-828907

    Data sheet

    Manufacturer
    HMG Paints Limited
    Interior / Exterior Use
    Interior Use
    Sheen
    Matt
    Satin
    Gloss
    Single, Two or Three Pack
    Single
    Pack Size
    1L
    2.5L
    5L
    20L
    Base Type
    Water based
    Interior/Exterior Use
    Interior Only
    Application
    Brush, Roller, Spray
    Touch Dry (at 20°C)
    30 Minutes
    Dry to Recoat (at 20°C)
    16 hrs minimum - 14 days maximum
    Fully Cured (at 20°C)
    24 Hours
    Coverage
    12 square metres per litre @ 30 microns dft (Theoretical)
    Density
    1.227 g/cm³
    Solids by Volume
    48.7 %
    VOC
    0.11 Kg/l
    Shelf Life (from date of manufacture)
    12 months from delivery date in original sealed containers.
    Size
    1L, 2.5L, 5L and 20L
    Recommended Dry Film Thickness
    30 μm
    Recommended Wet Film Thickness
    80 μm
    UN Number
    Not regulated
    Base Type
    Water-Based
    Finish
    Satin
    Finish
    Matt
    Finish
    Gloss
    Application Method
    Brush
    Application Method
    Spray
    Application Method
    Roller
    Product Usage Type
    Topcoat
    Product Range
    Waterborne
    Type of Wood Finish
    Wood Paint
    Suitable For
    Walls & Ceilings
    Colour Family
    Green
    Colour Family
    Clear
    Colour Family
    Red
    Colour Family
    Neutral
    Colour Family
    Pink
    Colour Family
    Anthracite Grey
    Colour Family
    Stone
    Colour Family
    Purple
    Colour Family
    Grey
    Colour Family
    Black
    Colour Family
    Blue
    Colour Family
    White
    Colour Family
    Brown
    Colour Family
    Metallic
    Colour Family
    Orange
    Colour Family
    Beige
    Colour Family
    Yellow
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Sally dowling on 2021-01-20 11:10:40
    Question: 

    I’m looking for high quality paint to brush/roll onto kitchen cabinets, would this be the best option for durability?

    Answer from Rawlins’ Technical Team: 

    Assuming the kitchen cabinets are clean, dry, sound and prepared as detailed in the Technical Data sheet this paint can be applied to kitchen cabinets.

    Please be aware this should not be used for application to worktops.


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG Waterborne LMP Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT