- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
Water-borne clear impregnation primer to stabilise timber surface and protect against biological attack of the coating layer. Suitable for application by flow coating, vacuum coating, dipping and brushing.
- Waterborne dipping impregnation with good penetration and moisture protection
- Provides even absorption of the base stain
- Quick-drying
- Good sanding properties
- Excellent foundation for coating systems
- For industrial use only
Quick Links - Click To Jump To Section:
Substrate and Preparation
Suitable for all commonly used timber species. Timber moisture content should be between 12 and 16%. The substrate must be clean, dry and free from dust, dirt, grease, silicone and wax.
Follow the appropriate Anker Stuy coating specification for other system products such as primers and end grain sealers.
Application Conditions
During application and for at least 10 minutes afterwards it is advised a temperature between 15⁰C and 20⁰C and a relative humidity of 60-70%. Do not apply below 8°C ambient and surface temperature and a relative humidity above 85%.
Data sheet
- Manufacturer
- Anker Stuy
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Wood
- Application Method
- Flow coating
Dip tank
Vacuum coater
Saturation spray - Sheen
- Translucent
- Single, Two or Three Pack
- Single
- Pack Size
- 20L
- Dry to Recoat (at 20°C)
- 4-6 hours
- Coverage
- Dependent on the absorption of timber and the way the timber is sawn.
Smooth planed – 16m2/ltr - Recommended Thinner/Cleaner
- Thin with clean water. Clean tools with warm water.
- Max. Application Temperature
- 20⁰C
- Min. Application Temperature
- 15⁰C
- Colour(s)
- Coloured / Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Doors
- Suitable For Use On
- Windowsills
- Suitable For Use On
- Wood
- Suitable For Use On
- Windows
- Finish
- Translucent
- Application Method
- Dip
- Application Method
- Flow coating
- Application Method
- Spray
- Application Method
- Vacuum
- Manufacturer
- Anker Stuy
- Product Usage Type
- Primer
- Product Range
- Ankolux
- Dust Dry
- 30 minutes
- Colour Family
- Clear
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Anker Stuy Ankolux Impregnation Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT