- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
HMG Fencing Stain
DEC903
HMG4553
Description
HMG Fencing Stain is a long lasting water based stain for use over fencing and other rough sawn garden timber to colour and protect.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Sheen - low dependant on substrate
- Water based
- Low odour
- Safe to use around plants and pets
- Non-drip formulation
Product Specification
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| HMG Fencing Stain | ||||||
| Volume Solids: | 9.5% | |||||
| VOC Content: | 0.060 Kg/l | |||||
| SG: | - | |||||
| Viscosity: | 3,800 mPas | |||||
| Density: | 1.019 g/cm³ | |||||
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
| Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
| Pot Life: | - | |||||
| Flash Point: | Above 32°C | |||||
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Brush: | 20 - 25 μm | 100 μm | |
| Roller: | 20 - 25 μm | 100 μm | |
Coverage: 15-20 square metres per litre depending on substrate.
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 30 - 40 minutes |
| Fully Cured: | 2 - 4 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Brush | Roller | ||||
| Mixing Ratio: | Ready for use. | Ready for use. | |||
| - | - | ||||
| Thinner Options: | - | - | |||
| Viscosity: | 3000 - 4000 cps brookfield viscometer | 3000 - 4000 cps brookfield viscometer | |||
| Spray Gun Setup: | - | - | |||
| Number Of Coats (Guide Only): | - | - | |||
| Flash Off: | - | - | |||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information On Basic Physical And Chemical Properties | ||||||
|---|---|---|---|---|---|---|
| HMG Fencing Stain | ||||||
| Form: | According to product specification | |||||
| Colour: | According to product specification | |||||
| Odour: | Characteristic | |||||
| Odour Threshold: | Not determined | |||||
| pH-value 20°C: | Not determined | |||||
| Melting point/freezing point: | Undetermined | |||||
| Initial boiling point and boiling range: | 100°C | |||||
| Flash Point: | Not applicable. | |||||
| Flammability (solid, gas): | Not applicable | |||||
| Ignition temperature: | 450°C | |||||
| Decomposition temperature: | Not determined. | |||||
| Auto-ignition temperature: | Product is not selfigniting. | |||||
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
| Explosion limits: Lower: | Not determined | |||||
| Explosion limits: Upper: | Not determined | |||||
| Vapour pressure at 20°C: | 23 hPa | |||||
| Density at 20°C: | 1.019 g/cm³ | |||||
| Relative density: | Not determined | |||||
| Vapour density: | Not determined | |||||
| Evaporation rate: | Not determined | |||||
| Solubility in / Miscibility with water: | Fully miscible | |||||
| Partition coefficient: n-octanol/water: | Not determined | |||||
| Viscosity: Dynamic at 20°C: | 3,800 mPas | |||||
| Viscosity: Kinematic: | Not determined | |||||
| Solvent content: Organic solvents: | 1.3% - Water: 89.2% | |||||
| Solids content: | 9.5% | |||||
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Product Details
4553-724171
Data sheet
- Manufacturer
- HMG Paints Limited
- Interior / Exterior Use
- Exterior
- Interior / Exterior Use
- Exterior
- Water / Solvent Based
- Water
- For Use On
- Unprepared
- Application Method
- Brush, Roller
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Mixing Ratio
- RFU
- Suitable Substrates
- Suitable for exterior wood
- Key Features
- Sheen - low dependant on substrate. Water based. Low odour. Safe to use around plants and pets. Non-drip formulation.
- Touch Dry (at 20°C)
- 30 - 40 minutes
- Dry to Recoat (at 20°C)
- 2 - 4 hours
- Coverage
- 15-20 square metres per litre depending on substrate.
- Max. Application Temperature
- 32°C
- Min. Application Temperature
- 10°C
- Density
- 1.019 g/cm³
- Solids by Volume
- 9.5%
- VOC
- 0.060 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Recommended Dry Film Thickness
- 20 - 25 μm
- Recommended Wet Film Thickness
- 100 μm
- UN Number
- Void
- Base Type
- Water-Based
- Exterior / Interior Use
- Exterior Use
- Suitable For Use On
- Wood
- Finish
- Matt
- Application Method
- Roller
- Application Method
- Brush
- Product Type
- Stain
- Type of Wood Finish
- Wood Stain
- Colour Family
- Black
- Colour Family
- Brown
- Colour Family
- Beige
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Fencing Stain is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT