OrganoWood Repellent 02 is a water-based wood treatment product developed to increase the superficial protection of wood against dirt, water and damp. The product is composed of a water emulsion including organic silicon polymers and natural growth substances without addition of toxic heavy metals or biocides.

OrganoWood Repellent 02 is easily absorbed by untreated wooden material. The product is specifically produced for superficial treatment and maintenance of OrganoWood - timber. In combination with OrganoWood Protection 01, the product creates a complete system for non-treated pine or fir in need of superficial protection. However, the product may favourably be used also on other kinds of wood such as traditional pressure impregnated wood, larch or core pine where it will act as a highly effective wood oil.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Application
• Note

Features & Benefits

• Water-based wood treatment
• Easily absorbed by untreated wood
• Composed of a water emulsion including organic silicon polymers and natural growth substances
• No toxic heavy metals or biocides
• For superficial treatment and maintenance of timber
• Creates a complete system for non-treated pine or fir in combination with OrganoWood Protection 01
• May be favourably used also on other kinds of wood where it will act as a highly effective wood oil
• Traditional pressure impregnated wood
• Larch
• Core pine
• Binds to fibres
• Extremely water repellent when dry
• Damp, water and water borne dirt unable to penetrate the wood
• Counteracts superficial growth such as mould
• Decreases movements of damp in wood, decreasing generation of new cracks
• Completely free from biocides and heavy metals such as copper, chromium and arsenic (CCA’s)
• Transparent and will not discolour the treated material
• Treated woods will still age and adopt a silver-grey nuance with time

Application

1. Shake the container and pour up desired amount in a separate plastic container.
2. Apply the product in the direction of the wood fibres with a brush or roller.
3. Let dry for 2-4 hours.
4. For an optimal protection, perform the treatment according to point 1-3 a second time.
5. Maintenance shall be performed when needed with OrganoWood Repellent 02.

Note

OrganoWood-treated wood should not be painted with conventional paints.

Due to the dense structure which has been created on the wood surface, conventional paints cannot penetrate the wood in the same way as on normal wood. Thus the bonding between the paint and the wood fibres gets worse.