• Blackfriar Exterior Varnish

Blackfriar Exterior Varnish UV77

BF0090002D3

Blackfriar Exterior Varnish UV77 Enhances and protects all wood and external joinery. It provides protection to all types of wood by resisting UV light to give your wood superior durability when applied over Blackfriar UV Wood Primer. It waterproofs as well as adding an attractive finish.

  • Enriches and protects your home and garden wood
  • Superior durability when applied over Blackfriar UV Wood Primer
  • Tough and flexible
  • Absorbs ultra violet light
  • Weather resistant
  • For use on bare or stripped wood

Colour
Size
Finish
£17.49
£20.99 Incl. VAT
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

Blackfriar Exterior Varnish UV77 Enhances and protects all wood and external joinery. It provides protection to all types of wood by resisting UV light to give your wood superior durability when applied over Blackfriar UV Wood Primer. It waterproofs as well as adding an attractive finish.

Preparation

Timber must be clean, dry and smooth. It must be free from any surface contamination such as oils, grease, loose or flaking varnish and denatured timber that may affect the performance of the Blackfriar Exterior Varnish. Remove excess resin from knots and clean with methylated spirit. Due to its orange/brown colour Blackfriar Patent Knotting should not be used under the Blackfriar Exterior Varnish.

Oily woods, such as teak or iroko, should be thoroughly cleaned with a cloth impregnated with white spirit to remove natural oils. Non-ferrous nails are recommended for fixing beading etc. Remove old varnish completely with Blackfriar Professional Paint and Varnish Remover, and then treat as new timber: Any French Polishes must also be completely removed.

Application

Apply 2 coats of Blackfriar UV Wood Primer by brush. Followed by 2 coats of Blackfriar Exterior Varnish for maximum durability. Work Blackfriar Exterior Wood Varnish into all areas of detail and joints. Allow to dry fully between coats. Do not apply the system to damp wood as this with limit penetration and affect durability.

Limitations

As with all exterior grade varnishes, inspect the coating regularly and maintain immediately if any sign of breakdown occurs. A maintenance coat is recommended at least annually, may be more frequent on areas subject to high UV levels.

Clean Up

Remove as much product as possible from application equipment before washing with white spirits. Do not empty product into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.

Product Features

  • Enriches and protects your home and garden wood
  • Superior durability when applied over Blackfriar UV Wood Primer
  • Tough and flexible
  • Absorbs ultra violet light
  • Weather resistant
  • For use on bare or stripped wood

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

Product Details
BF0090002D3

Data sheet

Manufacturer
Blackfriar Professional
Interior / Exterior Use
Exterior
Water / Solvent Based
Solvent
For Use On
Wood, Prepared, Unprepared
Application Method
Brush
Sheen
Satin, Gloss
Colour
Clear, Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
1L, 2.5L
Coverage
12-14m² per litre
Recommended Thinner/Cleaner
White Spirit (cleaning only)
VOC
400g/litre
Touch Dry
4-6 Hours
Exterior / Interior Use
Exterior Use
Type of Wood Finish
Wood Varnish

Specific References

ean13
5013296430241
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Rolph on 2015-09-16 14:02:27
Question: having just purchased softwood treated entrance gates (farm gates) can we apply your super yacht varnish to these newly installed treated tantalised gates. We have 3 7ft gates plus 1entrance gate 3ft 6 inch plus a 3ft 6inch dummy, also the relevant posts 3 8inch and 2 6inch posts Would be grateful for advice on the quantity and price. Thankyou
Answer: 

Yes, you can apply Blackfriar Super Yacht Varnish to exterior softwood as long as the tanalising treatment is completely dry. You must apply a minimum of 3 coats and you would require approximately 5 litres for the area you have.


Question about the product

* Required fields
(read)
Send
You might also like

Blackfriar Professional Paint & Varnish Remover

This product is temporarily unavailable; in the meantime, our technical team recommend Thermoguard Thermostrip PRO as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first...

Price £20.33
In Stock and Available for Delivery

Blackfriar Wood Protector Gold Star

This product is temporarily unavailable; in the meantime, our technical team recommend Sikagard Universal 5 Star Wood Treatment as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt...

Price £12.93
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £10.03
In Stock and Available for Delivery