Teamac Stable Paint
  • Teamac Stable Paint
  • Teamac Stable Paint
  • Teamac Stable Paint

Teamac Stable Paint

431/W463/1

Teamac Stable Paint , is a fast drying, water based sealer or finish coat for plaster, bricks and wood in stables and other outbuildings.

Advantages


Shipping Options (Select at Checkout):

Economy Shipping (10-14 Working Days): £10 +VAT
Express Shipping (2-3 Working Days): £25 +VAT

Colour
Size
Finish
£44.58
VAT excluded

£53.50 Tax incl.
Quantity

Description

Teamac Stable Paint is a fast drying, water based sealing coat (white) for plaster, bricks and wood. It can be overcoated or left as a finish and provides a 'bound' white finish with a low reflective matt white surface. Teamac Stable Paint is low odour and is also available in black and can be used as a sealer or a finish in stables, and other outbuildings.



Click To Jump To Section:




Features & Benefits


Advantages



Product Specification


Technical Data
Volume Solids 33%
VOC Content Max 30 g/litre
SG 1.33 @ 20°C
Viscostity 2.5 Poise @ 25°C
Flash Point Non-flammable



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness Theoretical Coverage
Maximum 35 to 40 µm 75 µm 14 m2/litre @ 35 microns D.F.T
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



Drying Times


Drying Times At 20°C/RH 50%
Touch Dry: 30 Mins
Dry To Handle: 2 Hours
Dry To Recoat: 6 Hours
Fully Cured: 5 - 7 Days



Do not paint when temperature will be at or below 7℃ during the painting and drying process.

Low temperature and high humidity will adversely affect application, drying and performance of any coating.



Surface Preparation


All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly

Preceeding Coat

  • Direct onto wood and masonry, porous surfaces may require 2 coats. Use Teamac All Metals Primer on metals.



Mixing


Mix well before use.



Application Conditions


Do not apply below 7°C. As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.



Application Methods


Method Airless Spray Conventional Spray Brush Roller
  No No Yes No



  • Thinner (Max vol): Clean Water (10%)
  • Nozzle Size: N/A"
  • Nozzle Pressure:N/A
  • Clean Water



Health & Safety


See safety data sheet - SDS 11530

Click to go back to the top of the page



It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
431/W463/1

Data sheet

Manufacturer
Teamac
For Use On
Prepared, Unprepared, Plaster, Brickwork, Wood
Application Method
Brush
Sheen
Matt
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Single
Pack Size
5L
Dry to Handle (at 20°C)
2 hours
Dry to Recoat (at 20°C)
6 hours
Coverage
13m² per litre
VOC
Max 30 g/litre
Touch Dry
30 mins
Recommended Dry Film Thickness
35 to 40 µm
Recommended Wet Film Thickness
75 µm
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send