- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Mathys Fassicoat
7.701.0.75
Mathys Fassicoat is a satin finish wood paint for interior and exterior areas that does not require any primer or undercoat.
- Moisture-regulating paint
- Serves at the same time as primer, surfacer and finish
- Excellent weather resistance
Description
Mathys Fassicoat
Mathys Fassicoat may be applied directly on wood, both outside and inside, without any other priming coat. Mostly 2 coats of Fassicoat are sufficient for getting excellent results.
Features & Benefits
- Moisture-regulating paint
- Serves at the same time as primer, surfacer and finish
- Excellent weather resistance
Technical Data
- Density: 1,33 - 1,38
- Gloss Level: Satin
- Solids content in volume: 51 - 56 %
- Solids Content in weight: 69 - 73 %
Drying Times At 20°C/RH 50%
- Touch dry: 3 - 4 hours
- Dry to handle: 5 hours
- Dry to recoat: 24 hours
- Fully cured: 1 week
Theoretical Consumption
10 - 15 m²/l
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Surface Preparation
Fassicoat serves as primer, surfacer and finish. Therefore, it is not necessary to use a special primer. In case of application on new and non-treated wood, if necessary, dilute the first coat with ± 3% volume of white spirit. In case of jointing, use Plastopan Super or Pegaflex by preference
Application Conditions
Apply in a dry and well-ventilated area. Temperature minimum 10°C. Relative humidity max. 80%
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
7.701.0.75
Data sheet
- Manufacturer
- Mathys
- Interior / Exterior Use
- Interior and Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Wood, Prepared, Unprepared
- Application Method
- Brush, Roller, Airles Spray, Air-Atomised Spray
- Sheen
- Satin gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 2.5L
- Dry to Handle (at 20°C)
- 5 hours
- Dry to Recoat (at 20°C)
- 24 hours
- Fully Cured (at 20°C)
- 1 week
- Coverage
- 12m² per litre
- Recommended Thinner/Cleaner
- Thinner 22
- Max. Application Temperature
- Relative humidity max. 80%
- Min. Application Temperature
- 10°C
- Density
- 1,33 - 1,38
- Solids by Volume
- 51 - 56 %
- Touch Dry
- 3 - 4 hours
- Recommended Dry Film Thickness
- 55 µm
- Recommended Wet Film Thickness
- 100 ùm
- UN Number
- Not regulated
 Neil Hoyle on 2016-04-21 08:48:27 | Question: Hello - Can you supply Mathys Fassicoat tinted to Farrow & Ball colours? Thank you! |
Answer: No, we can mix Mathys Fassicoat to RAL, BS and NCS colours. | |