A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...
Timberex Heavy-Duty UV PLUS
An improved version of the Timberex Heavy-Duty UV wood oil, with improved coverage, smell, water resistance, UV resistance and faster curing.
Timberex Heavy-Duty UV PLUS is an improved version of the Heavy-Duty UV wood oil, with improved coverage, smell, water resistance, UV resistance and faster curing. Heavy-Duty UV PLUS uses natural, fast drying oils and resins which penetrate deeply into the wood.
Features & Benefits
- Seals and protects wood from within
- For high traffic areas as airports, museums, conference centres and more
- UV-blockers prevent discoloration
- Protects the wood against liquids and stains
- Protects without losing the ‘natural wood look’
- VOC2010-compliant, EN71-3 Certified (Food- and Toy-safe) and German Anti-slip rating R9
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 9-12m² per litre
- Touch Dry
- 6-10 hours
- Brush, Roller
|Ken Case on 22/08/2018|| |
The interior of my 27 foot boat is fitted out with teak flooring and teak furniture. Both are in good condition with just a little fading. I am keen to keep them in good order. Which products would you recommend? What preparation is necessary? How should be product be applied? Ken
We would suggest Timberex Hard Wax Oil, preparation and application information can be found in the product TDS (Technical Data Sheet) available from the 'Download' section on the product page.
A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Offers a compromise of a tradtional oil and a coating with superior protection against spillages. It greatly enhances colours and grain and allows wood to age naturally into rich varying tones.
A waterborne acrylic satin gloss paint for interior and exterior woodwork, both bare and previously painted. Pegacryl Satin has weather resistance better than most synthetic enamels and can also be used as a topcoat for Noxyde.
Transform your interior wooden surfaces with Blackfriar Quick Drying Varnish. Ideal for all interior wood including doors and panelling, it provides a quick drying finish that is tough and durable. Blackfriar Quick Drying Varnish resists knocks, hot water splashes and some household stains.
A clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability.
A range of water-based grey stains that penetrate deep into the wood for a lasting grey ‘weathered wood’ look. Only need to apply once, then a topcoat can be applied.
Timberex Wax-Oil greatly enhances colours and grain and allows wood to age naturally into rich varying tones. Made from fast curing natural oils and carnuba wax it cures to a deep satin finish.
Coo-Var Acrylic Varnish is a water-based, clear varnish for wood and other surfaces available in gloss or eggshell finishes. A good, quick drying and safer alternative to solvent based products. ADVANTAGES Quick drying Safer alternative to solvent-based products Gloss & Eggshell finishes Interior use Four tin sizes available
A high quality, quick drying, non yellowing acrylic polyurethane satin enamel for interior and exterior use on timber, metals, plastics, masonry, previously painted surfaces and more.