Blackfriar Raw Linseed Oil penetrates deep into wood, nourishing it from within. It is ideal for oak beams, cricket bats and bean canes. Nourishes and protects all wood Penetrates deep into wood Suitable for most woods Interior and exterior use Can also be used for softening glazing putty Applies by brush or rag Good coverage of up to...
A range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.
Timberex Aqua is a range of water-based stains for interior use that penetrate deep into the wood for a lasting colour effect without losing the ‘wood’ look. The stains are fastdrying, allowing the topcoat to be applied within a few hours, minimizing time and costs.
We advice to contact your nearest dealer for colour samples before application. Shown colours are guidelines.
- Protects against stains and traffic
- High coverage up to 20m²/L per layer
- Colours can be mixed together for a wide range of effects
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Mathys Fassicoat is a satin finish wood paint for interior and exterior areas that does not require any primer or undercoat. Moisture-regulating paint Serves at the same time as primer, surfacer and finish Excellent weather resistance
Blackfriar French Polish provides a classic fine finish for wood. It is suitable for new, stained, or previously French Polished wood and brings out the natural beauty of wooden surfaces. Fast drying times - Touch dry in 15 - 30 minutes. Recoat after 1 hour. Interior use High gloss, fine finish Shellac based Recoat after 1 hour Use on...
Coo-Var Ebony Black provides a classic black finish with low sheen which makes it ideal for ironwork, beams, downpipes, radiators etc. Suitable for both interior and exterior applications. Product Features Can be applied to wood, metal and masonry Decorative Multi-purpose Classic, black finish Interior and exterior use
Coo-Var Siliconised Teak Oil is a blend of natural oils and silicone derivatives to enhance, preserve and restore the appearance of teak and other hardwoods. Good degree of resistance to water Can be used inside or outside Oil takes better to hardwood than traditional varnish Good on teak and other hardwoods Ideal for use on outdoor...
Blackfriar Polyurethane Varnish transforms interior woodwork. This tough and durable varnish brings out the natural grain and colours of wooden surfaces – and protects them from household stains including hot water. For all types of interior wood. It is tough and durable, resists hot water splashes and dilute acids and is solvent based....
Resupen WB is a an extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. ADVANTAGES Chemical resistant UV stable Good abrasion and impact resistance Hygienic and easy to clean No VOC’s...
Coo-Var Polyurethane varnish is a single pack product of exceptional durability based on urethane alkyd. For interior use only. Product Features For Interior Use Suitable Surfaces: Wood Finish: Matt Application: Roller or brush Drying time: Touch Dry 2 hours or 12 hours hard dry Overcoat time: 12 hours or overnight Estimated...
Mathys Fassithane Gloss is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability. Quick drying Does not yellow Scratch and wear resistant No tendency to wrinkle when applying thick layers
Ardenbrite Metallic Paint (Solvent Based) is a lustrous, metallic finish for the redecoration of props, artefacts, statues, emblems, lamps, vases, metal furniture and mirrors. The water-based finish is also available, here.
Coo-Var Matt Black Water Based is a high opacity flat black acrylic coating providing a finish to internal surfaces anywhere a non-reflective surface is required. Product Features Water-based Less odours than solvent-based Fast drying Non-reflective Decorative Apply directly to wood and masonry Can be used on cement