Timberex Active Stain
A range of water-based grey stains that penetrate deep into the wood for a lasting grey ‘weathered wood’ look. Only need to apply once, then a topcoat can be applied.
Timberex Active Stain is a range of water-based grey stains that penetrate deep into the wood for a lasting grey ‘weathered wood’ look. Only apply once, then topcoat can be applied.
Features & Benefits
- Trendy grey shades for oak wood
- High coverage up to 8-12 m²/L
- Water-based and non-corrosive
- Easy application, no special tools needed
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||8-12m² per litre|
|Touch Dry||12 hours|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Norman Biddlecombe on 11/11/2017|
Question: Would the Driftwood be suitable for staining Birch Plywood for an internal ceiling and then protected with an oil or oil/wax finish such as Osmo or Fiddes ?
Although you recommend application by roller I take it there is no problem with using a sponge and brush as I will need to protect the walls while working on the ceiling.
On the basis that the plywood will be porous and allow the oil to penetrate, then yes, Timberex Active Satin could be used. Application by brush instead of roller is acceptable but we have no experience of the product being applied by sponge.
Timberex Enviro should be used as a finishing oil and not Osmo or Fiddes.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close