Mathys Fassithane Matt

    634.1.1

    We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

    Quantity
    Product not available
    This Product has been Discontinued

    Description

    We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

    Mathys Fassithane Matt is a hard, clear, durable finishing varnish for wood that is based on polyurethane alkyd resins.

    Features & Benefits

    • Quick drying
    • Does not yellow
    • Scratch and wear resistant
    • No tendency to wrinkle when applying thick layers
    • Indoor use only - easy to clean

    Technical Data

    • Density: 0,93 - 0,95
    • Gloss Level: Matt
    • Solids content in volume: 44 - 46 %
    • Solids Content in weight: 53 - 55 %

    Drying Times At 20°C/RH 50%

    • Touch dry: 1½ hour
    • Dry to handle: 2 hours
    • Dry to recoat: 6 hours
    • Fully cured: 7 days

    Theoretical Consumption

    ± 15 m²/l per coat

    Practical Consumption

    Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

    Surface Preparation

    The substrate must be smooth and completely dry and clean. New wood: rub down and make dustfree (use a cloth damped in white spirit). Degrease resinous or exotic wood with thinner. Remove old varnish layers with a paint stripper (Rapid Super). After this rub down lightly and clean with white spirit. Old varnish layers with good adhesion: rub down lightly and clean. Restore discoloured parts with Fassitek and rub down.

    New Wood

    • Impregnate with Adex or Fassitek if it is necessary to colour the wood.
    • If colouring is not necessary, first apply a thinned coat Fassithane Matt

    Application Conditions

    Apply in a dry and well-ventilated area. Temperature of air, substrate and coating material between 10 and 35°C and relative humidity below 80%. The substrate temperature must be at least 3°C above dew point.

    Remarks

    In case the recoat time between successive coats is longer than 24 hours, it is necessary to clean the surface with a clothed soaked in white spirit in order to achieve a good adhesion.

    Product Details
    634.1.1

    Data sheet

    Application
    Brush, Roller, Spray
    Dry to Handle (at 20°C)
    2 hours
    Dry to Recoat (at 20°C)
    6 hours
    Fully Cured (at 20°C)
    7 days
    Coverage
    15m² per litre
    Max. Application Temperature
    35°C
    Min. Application Temperature
    10°C
    Density
    0,93 - 0,95
    Solids by Volume
    44 - 46 %
    VOC
    400 g/l m
    Shelf Life (from date of manufacture)
    2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C
    Touch Dry
    1.5 hours
    UN Number
    Not regulated
    Brand
    Mathys
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Mathys Fassithane Matt is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Rust-Oleum Thinner 22

    We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types....

    In stock